検出サーバーおよび
Network Discover
クラスタの以前のリリースへの復帰

Enforce サーバーのロールバックの完了後に、検出サーバーまたは
Network Discover
クラスタのロールバックを完了するには、以下の手順に従います。
これらの手順は、検出サーバーと、
Network Discover
クラスタを構成するワーカーノードおよびデータ ノードに適用されます。
最初に検出サーバーをロールバックすると、検出サーバーの
[システム] > [サーバーと Detector] > [概要] > [サーバー/Detector の詳細]
画面に
[不明]
状態が表示されます。
  1. 検出サーバーホスト上で動作しているすべての
    Symantec Data Loss Prevention
    サービスを停止します。
  2. Symantec Data Loss Prevention
    サービスを復元します。
    Symantec Data Loss Prevention
    サービスは移行処理中にバックアップされます。サービスファイルを以前のリリースの
    Services
    フォルダに移動する必要があります。
    • お使いのプラットフォームに応じて、以下の場所でバックアップされたサービスを見つけます。
      • Windows:
        \Program Files\Symantec\DataLossPrevention\DetectionServer\
        vv.u
        \Protect\backup\service-
        <date>-<time>
      • Linux:
        /opt/Symantec/DataLossPrevention/DetectionServer/
        vv.u
        /Protect/backup/service-
        <date>-<time>
        vv.u
        は以前のバージョンに置換し、
        <date>-<time>
        は移行処理が完了した日時に置換します。
    • SymantecDLPDetectionServer.conf
      サービスをコピーします。
    • お使いのプラットフォームに応じて、このサービスを以下の場所に貼り付けます。
      • Windows:
        \Program Files\Symantec\DataLossPrevention\DetectionServer\Services
      • Linux:
        /opt/Symantec/DataLossPrevention/DetectionServer/Services
  3. 以前の
    Symantec Data Loss Prevention
    バージョンでサービスを有効にします。
    Windows プラットフォームの場合は、各サービスの
    [スタートアップの種類]
    [自動]
    に設定されていることを確認します。
  4. 以前の
    Symantec Data Loss Prevention
    バージョンでサービスを開始します。
    復帰させるサーバーの種類に応じてサービスを開始します。
    • 検出サーバー: Symantec DLP 検出サーバー
    • Network Discover
      クラスタのデータ ノード:
      • Symantec DLP Detector
      • Symantec DLP Enforce Connector
    • Network Discover
      クラスタのワーカー ノード: Symantec DLP Detector
  5. クラスタをリストアする場合は、以下の手順に従います。
    1. DiscoverCluster.properties
      を開きます。このファイルは、お使いのプラットフォームに応じて以下のパスにあります。
      • Windows:
        \Program Files\Symantec\DataLossPrevention\DetectionServer\
        16.0.10000
        \Protect\configb
      • Linux
        /opt/Symantec/DataLossPrevention/DetectionServer/
        16.0.10000
        /Protect/config
    2. お使いのプラットフォームに対応する表に示されている変数のパスを置き換えます。
      Windows の変数
      変数名
      パス
      discover.cluster.ignite.
      work.dir
      変更前:
      C:/ProgramData/Symantec/DataLossPrevention/DetectionServer/
      [vv.uu]
      /IgniteWork
      変更後:
      C:/ProgramData/Symantec/DataLossPrevention/DetectionServer/IgniteWork
      discover.cluster.ignite.
      storage.dir
      変更前:
      C:/ProgramData/Symantec/DataLossPrevention/DetectionServer/
      [vv.uu]
      /IgniteStorage
      変更後:
      C:/ProgramData/Symantec/DataLossPrevention/DetectionServer/IgniteStorage
      Linux の変数
      変数名
      パス
      discover.cluster.ignite.work.dir
      変更前:
      /Var/Symantec/DataLossPrevention/DetectionServer/
      [vv.uu]
      / IgniteWork
      変更後:
      /Var/Symantec/DataLossPrevention/DetectionServer/IgniteWork
      discover.cluster.ignite.storage.dir
      変更前:
      /Var/Symantec/DataLossPrevention/DetectionServer/
      [vv.uu]
      /IgniteStorage
      変更後:
      /Var/Symantec/DataLossPrevention/DetectionServer/IgniteStorage
      [vv.uu]
      は以前の
      Symantec Data Loss Prevention
      バージョンです。