Adding Subsystem IDs for a Probe

Adding Subsystem IDs for a Probe
uimpga-ga
This task is only required if you need to configure custom alarms and messages. Alarms are classified by their subsystem ID, identifying which part of the system the alarm relates to. These subsystem IDs are kept in a table maintained by the CA nas probe. You can add subsystem IDs manually to CA UIM using the nas Raw Configuration menu in Admin Console. For more information about the nas probe, see the nas (Alarm Server) article.
Update the Subsystem IDs in Admin Console
 
Follow these steps:
 
  1. For the nas probe, select 
    Raw Configure
    .
  2. Click the 
    Subsystems
     folder.
  3. Locate the appropriate section. For example, Private.
  4. Click 
    Add Key
    .
  5. Enter the Key Name in the Add key window, click 
    Add
    . The new key appears in the list of keys with a blank value.
  6. Click in the Value column for the newly created key and enter the key value.
  7. Repeat this process for all of the required subsystem IDs for your probe.
  8. Click 
    Apply
    .
Update the Subsystem IDs in Infrastructure Manager
 
Follow these steps:
 
  1. In Infrastructure Manager, right click on the nas probe, select 
    Raw Configure
    .
  2. Click the 
    Subsystems
     folder.
  3. Locate the appropriate section. For example, Private.
  4. Click 
    New Key
    .
  5. Enter the Key Name and Value, click 
    OK
    .
  6. Repeat this process for all of the required subsystem IDs for your probe.
  7. Click 
    Apply
    .