Configure Power Cisco UCS

This action type lets you configure a power management action for a UCS blade server.
casa
This action type lets you configure a power management action for a UCS blade server.
The
Details
section of the action definition contains the following fields:
  • UCS Manager
    Specifies the name of the UCS Manager
  • UCS Chassis
    Specifies the name of the UCS Chassis
  • UCS Blade
    Specifies the name of the UCS Blade
  • Power Operations
    Select an operation from the drop-down list:
    • Cycle Immediate
      Immediately power cycle the blade
    • Cycle wait
      Power cycle the blade which notifies all applications about its shutdown
    • Hard Reset Immediate
      Plug back to power on the blade similar to unplug the power of the blade
    • Hard Reset wait
      Unplugs the power of the blade. Prior to unplugging, the blade notifies all applications about its shutdown
    • Soft Shut Down
      Shuts down the blade. Prior to shutdown, the blade notifies all applications about its shutdown
    • Shut Down
      Shuts down the blade immediately
    • Boot up
      Boots up the blade
  • Require Approval
    Select to specify that the ticket requires approval by a third party.
    CA SDM must be configured to use this option.
  • Auto close ticket on approval/rejection
    Select to close the ticket after it is approved or rejected.
    CA SDM must be configured to use this option.
  • Ticket Types
    Select a valid ticket type from the drop-down list. Depending on your configuration, valid types include:
    • Default
    • Incident
    • Problem
    • Request
    CA SDM must be configured to use this option.
  • Templates
    Specifies the template to use to create a ticket. Select a template from the drop-down list. Depending on the ticket type selected, the form is populated with corresponding values.
    CA SDM must be configured to use this option.