Configuring WLC related Thresholds

You can configure minor, major and critical thresholds from the OneClick Explorer View > Wireless Device/ Controller level > Information Tab> Cisco Light Weight Access Point Protocol > Thresholds to generate alarms related to WLC/ AP/ Clients.Please refer to the list below to view where the corresponding alarms are asserted.
casp101
You can configure minor, major and critical thresholds from the
OneClick Explorer View
>
Wireless Device/ Controller level
>
Information Tab
>
Cisco Light Weight Access Point Protocol
>
Thresholds
to generate alarms related to WLC/ AP/ Clients.
Please refer to the list below to view where the corresponding alarms are asserted.
WLC_Thresholds.png
Access Points
  • Number of Access Points supported by current WLC device
  • Max supported is defined in device configuration (WLC MIBs)
Alarm(s) are asserted on WLC
Mobile Nodes/Clients
  • Number of Clients supported by current WLC device
  • Max supported is defined in device configuration (WLC MIBs)
Alarm(s)are asserted on WLC
Access Point Users
  • Number of Users supported by each AP (applicable for all APs under current WLC device)
  • Max supported is configurable by the user (Default Value: 500)
Alarm(s) are asserted on AP
Download Volume Per Client
  • Download data used per Client (applicable for all clients under current WLC device)
  • Max supported is configurable by the user (Default value: 10240 MB)
Alarm(s) are asserted on AP, under which Client is latched
Upload Volume Per Client
  • Upload data used per Client (applicable for all clients under current WLC device)
  • Max supported is configurable by the user (Default value: 10240 MB)
Alarm(s) are asserted on AP, under which Client is latched