Issues Resolved

2
casp102
2
Issues Resolved in CA Spectrum 10.2.3
Fixes to SpectroSERVER
Symptom
: SpectroSERVER crashes while processing CORBA alarm filter client request.
Resolution
: Improved code to increase stability when processing CORBA alarm filter client requests.
(10.2.3, DE315589, 00837544)
Symptom:
Unable to run the Availability Reports for the Spectrum Standard Events.
Resolution:
 Availability Reports can run for the Spectrum Standard Events.
(10.2.3, DE316293, 00843631)
Symptom:
\u003CbMLS Core while editing events\u003C/b:\u003Cdiv/\u003C/div\u003Cdivthe user was editing Event in ECE and after editing EvFormat and AlertMap files, and Saved in ECE \u2013 Spectrum crashed with CORE file /\u003Cdiv/\u003C/div\u003Cdiv/\u003C/div\u003C/div.
Resolution
: The fix is available in the 10.2.3 release. 
(10.2.3, DE327757, 00884682)
Symptom
: Spectrum crashed when MplsPathUp Trap is received.
Resolution
: Spectrum does not crash when MplsPathUp Trap is received.
(10.2.3, DE328814, 00889594)
Symptom
: SpectroSERVER may crash when the LACP port goes down.
Resolution
: SpectroSERVER does not crash when the LACP port goes down.
(10.2.3, DE330740, 00901779)
Symptom
: SpectroSERVER may crash when it receives bad varbind data from BGP trap.
Resolution
: SpectroSERVER does not crash when it receives bad varbind data from BGP trap.
(10.2.3, DE335701, 00912494)
Symptom:
When CA Spectrum in integrated to CAPC, Inventory sync occurs when one or more landscapes in the DSS are down.
Resolution
: When CA Spectrum in integrated to CA PC, Inventory sync does not occur when one or more landscapes in the DSS are down.
(10.2.3, DE338209, 00689244)
Symptom
: Spectrum crashed once a day for the last two months.
Resolution
: Improved error checking and error handling when forwarding traps.
(10.2.3, DE328481, 00858694)
Fixes to WebClient
Symptom:
Wrong icon and condition are shown for Services models in WebClient.
Resolution
: Correct icon and condition are shown for Services models in WebClient.
(10.2.3, DE305350, 00783718)
Fixes to Discovery and Modeling
Symptom
: Spectrum model activation is taking a long time to activate the Chassie models.
Resolution
: Spectrum model activation does not take a long time to activate the Chassie models.
(10.2.3, DE340891, 00920097)
Symptom
: Device Model Type "Matrix 6G" models interfaces as Inet_If_Port.
Resolution
: Performance tab and attributes of interfaces of Enterasys devices are displayed correctly in OneClick console.
(10.2.3, DE330333, 00898536)
Symptom
: Context gets appended to the name of the Virtual load balancer(Cisco ACE) device while modeling using modeling gateway.
Resolution
: Modeling Virtual Load Balancers (Cisco ACE) devices using modeling gateway is not appending any context in the name, if the context is already present.
(10.2.3, DE319573, 00810671)
Fixes to OneClick
Symptom
: The font size changes and is not preserved in OneClick Console when editing the preferences.
Resolution
: Changing the font size under Preferences in OneClick Console View menu is preserved as expected.
(10.2.3, DE292250, 00743662)
Symptom
: Models show up in the MAC Address in OneClick.
Resolution
: Models do not show up in the MAC Address in OneClick.
(10.2.3, DE301214, 00760930)
Symptom
: The OneClick Webserver is going OutOfMemory while reading the client.log file when its size is very huge ~300MB or above.
Resolution
: The OneClick Webserver will handle the reading of large client.log files as this solution has the optimized client.log file purging based on number of days and maximum entries logic in place.
(10.2.3, DE309552, 00809631)
Symptom
: CPU and Memory names are not populated in the first column of the performance tab view. 
Resolution
: CPU and Memory names are populated in the first column of the performance tab view.
(10.2.3, DE310238, 00789311)
Symptom:
Event Configuration Editor takes 10 minutes to load events when launched from a remote computer when there is a network latency between OneClick Server and OneClick Client. 
Resolution
: Event Configuration Editor loads the events under reasonable time.
(10.2.3, DE311628, 00815308)
Symptom
: reconcile_reporting_db.sh cannot run against OneClick which has SSL enabled.
Resolution
: reconcile_reporting_db.sh can be run against OneClick which has SSL enabled.
(10.2.3, DE326094, 00809488)
Fixes to Alarm Management
Symptom:
All the alarms are not displayed in "Alarms Log: All" and "Alarms Log: Selected Devices and Models".
Resolution:
All the alarms will be displayed in "Alarms Log: All" and "Alarms Log: Selected Devices and Models".
(10.2.3, DE303803, 00707789)
Symptom:
LiveHealth interface alarms are being asserted on the device instead of the interface model in Spectrum.
Resolution
: LiveHealth interface alarms are asserted on the interface model in Spectrum.
(10.2.3, DE304087, 00732858)
Symptom:
Created On date in Cleared Alarm History Tab is incorrectly shown for some events.
Resolution
: Created On date in Cleared Alarm History Tab is correctly shown for all events.
(10.2.3, DE309016, 00804923)
Symptom:
Spectrum was not able to handle the clear alarm case when we have duplicate models present in spectrum while getting a clear event from UIM.
Resolution:
\u003Cspan style="color: rgb(68, 68, 68); font-family: NotoSans, Helvetica, Arial;"When the alarm clear from\u003C/span \u003Cspan style="color: rgb(68, 68, 68); font-family: NotoSans, Helvetica, Arial;"UIM, spectrum also should clear the alarm even we have duplicate models.\u003C/span.
(10.2.3, DE310494, 00815412)
Symptom:
Modified Alarm filters are not getting exported/imported.
Resolution:
Modified Alarm filters will now be exported/imported.
(10.2.3, DE311473, 00813559)
Symptom:
When editing the event message, you cannot save the event unless you select something else in the window. When editing the alarm text (Type, Symptoms, Probable Causes & Recommended Actions) save option is not enabled even on focus change.
Resolution
: \u003Cspan style="font-family: "Segoe UI", sans-serif; font-size: 9pt;"When editing the event message you can save the event without \u003C/span\u003Cspan style="font-family: "Segoe UI", sans-serif; font-size: 9pt;"selecting something else in the window. \u003C/spanWhen editing the alarm text (Type, Symptoms, Probable Causes & Recommended Actions) save option will be enabled on focus change.
(10.2.3, DE311743, 00811128)
Symptom:
Clear alarm is not being retrieved by the rest client.
Resolution
: \u003Cdiv class="rally-rte-class-081dc0d828dc7f"Web Services subscription updating after a failover\u003C/div.
(10.2.3, DE313141, 00802542)
Symptom
: RouteExplorer traps are not triggering alarms due to incorrect mapping of severity.
Resolution
: RouteExplorer traps are triggering alarms after correction of severity map and Event disp files.
(10.2.3, DE318549, 00843228)
Symptom:
Selected alarms from the alarm list were not getting cleared if the thread execution delay occurs.
Resolution:
Selected alarms after the prompting for the user confirmation while clearing the alarms are stored in the temporary list, and this temporary list is being passed for getting cleared. This will not be impacted even if the thread execution gets delayed in the client side(OneClick console).
(10.2.3, DE321155, 00847128)
Symptom
: Alarm title changes in Spectrum for CA PM alarms.
Resolution
: The user will be able to customize the CA PM alarm title from \u003Cspan class="final-path"netqos-integration-application-config.xml\u003C/span file.
(10.2.3, DE328048, 00867592)
Symptom
: There is wrong alarm information.
Resolution
: When an alarm is selected in OneClick console, the alarm information is displayed correctly in the Information tab. 
(10.2.3, DE323659, 00856419)
Symptom
: LiveHealth interface alarms are being asserted on the device instead of the interface model in Spectrum.
Resolution: 
The fix is available in the 10.2.3 Spectrum release. 
(10.2.3, DE304087, 00732858)
Integration Fixes
Symptom:
Spectrum was not able to handle the clear alarm case when we have duplicate models present in spectrum while getting a clear event from UIM.
Resolution
: \u003Cspan style="color: rgb(68, 68, 68); font-family: NotoSans, Helvetica, Arial;"When the alarm clear from\u003C/span \u003Cspan style="color: rgb(68, 68, 68); font-family: NotoSans, Helvetica, Arial;"UIM, spectrum also should clear the alarm even we have duplicate models.\u003C/span.
(10.2.3, DE343717, 00815412)
Symptom
: VNA has multiple OC problems.
Resolution
: The user can discover/Sync/Delete/Configuration of domains only from MLS which is integrated with VNA in a distributed environment.
(10.2.3, DE319912, 00858763)
Fixes to Secure Domain Connector (SDC)
Symptom:
Secure Domain traps are improperly processed from both the primary SDC and the backup SDC, creating duplicate events.
Resolution:
Secure Domain traps from the backup SDC are now dropped if the primary SDC is connected.
(10.2.3, DE318539, 00852953)
Symptom
: Secure Domain Connector creating invalid alarms when under heavy load (hundreds of requests creating hundreds of threads).
Resolution:
Secure Domain Connector re-architected to efficiently manage high volumes of SNMP requests using just a few native threads.
(10.2.3, DE320616, 00788951)
Symptom
: Memory growth over time in Secure Domain Connector (SDC).
Resolution
: Multi-threaded SDC architecture changes have resolved memory growth and increased stability.
(10.2.3, DE329281, 00895734)
Fixes to SNMP
Symptom:
SNMPv3 traps received on an IPv6 interface (IPv6-mapped IPv4 address) are not processed properly.
Resolution:
SNMPv3 traps from an IPv6-mapped IPv4 address are now properly processed.
(10.2.3, DE321858, 00862840)
Symptom:
In Trap Based Continuous Discovery, on receiving SNMPv2c trap, device is being modeled as SNMPv1 i.e. with V1 community name.
Resolution:
On receiving SNMPv2c trap, device is modeled with SNMPv2c community name.
(10.2.3, DE330476, 00847060)
Symptom
: SNMPv3 profiles are not migrated properly from 10.2.1 to 10.2.2.
Resolution
: Migration problem is resolved, but might require new action 0x10332 to be sent to GlobalConfig model if interim changes were made. The action will migrate the old profiles and overwrite any new ones. (10.2.3, DE331291, 00903607)
Fixes to Reporting Manager
Symptom:
Spectrum product usage and monitoring status dashboards are not available in JasperReports Server.
Resolution:
Spectrum product usage and monitoring status dashboards are added to dashboards folder.
(10.2.3, DE326165, 00882823)
Fixes to NCM
Symptom
: Spectrum NCM does not use secondary username.
Resolution
: NCM capture is working when providing primary credentials as wrong and secondary correct credentials.
(10.2.3, DE318308, 00805925)
Miscellaneous 
Symptom:
"Device has stopped responding to polls" with alarm on AccessPoint model if its duplicate IP model is kept in maintenance.
Resolution:
Alarm will be cleared/not generated for AccessPoints which are reachable, even if one of the duplicate IP models is kept in maintenance.
(10.2.3, DE306315, 00721260)
Symptom
: Device's Mac Address is not populated in Spectrum due to Database corruption.
Resolution
: Provided an action to evaluate and Populate the Mac Address in Spectrum.
(10.2.3, DE311711, 00815323)
Symptom:
The port speed for ATM VCL link is incorrectly populated.
Resolution:
The Port speed for ATM VCL for the internet uplink is correctly populating.
(10.2.3, DE330398, 00881695)
Symptom
: Unexpected email error after upgrading to 10.2.1. 
Resolution
: Mail is getting sent successfully after the changes.
(10.2.3, DE312812, 00804515)
Symptom
: Spectrum "Processd.exe" Denial of Service Vulnerability
Resolution
: Processd will not crash while running the Proof-of-Concept Script.
(10.2.3, DE323550, 00872487)
 
Issues Resolved in CA Spectrum 10.2.2
Fixes to SpectroSERVER
Symptom
: Secure Domain Connector crash when modifying SNMPv3 profiles if SDC is connected to multiple SpectroSERVERs. 
Resolution
: Protected against multiple SNMPv3 profile updates from running at the same time.
(10.2.2, DE281470, 00696474)
Symptom
: SpectroSERVER crash during interface performance monitoring. 
Resolution
: SpectroSERVER do not crash during interface performance monitoring.
(10.2.2, DE281812, 00675251)
Symptom
: SpectroSERVER crash when modifying SNMPv3 profiles in a Secure Domain Configuration. 
Resolution
: Resolved SpectroSERVER crash.
(10.2.2, DE292907, 00745410)
Symptom
: SpectroSERVER memory growth over time when using invalid SNMPv2/v3 credentials. 
Resolution
: Properly handled failures in SNMPv2/v3 authentication.
(10.2.2, DE294105, 00740464)
Symptom
: SpectroSERVER may run into performance issue during destroy of a VM from an ESX host. 
Resolution
: SpectroSERVER never run into performance issue during destroy of a VM from an ESX host.
(10.2.2, DE295165, 00694818)
Symptom
: SpectroSERVER may run into performance issue while destroying an Event Model from EventAdmin. 
Resolution
: SpectroSERVER never run into performance issue while destroying an Event Model from EventAdmin.
(10.2.2, DE295203, 00706249)
Symptom
: SpectroSERVER may run into OutOfMemory during LLDP discovery. 
Resolution
: SpectroSERVER never run into OutOfMemory during LLDP discovery.
(10.2.2, DE283887, 00631083)
Symptom:
 SpectroSERVER activation is taking a long time due to SPM Inventory intelligence. 
Resolution
: SPM Inventory activation now configured to use multi-model requests, speeding activation by 50 fold.
(10.2.2, DE284546, 00664743)
Symptom
: SpectroSERVER crash due to eVPN intelligence. 
Resolution
: Resolved crash due to unexpected interaction between eVPN intelligence and destroyed RTM models.
(10.2.2, DE285387, 00710032)
Symptom
: SpectroSERVER unable to manage SNMPv3 devices with duplicate engineIDs. 
Resolution
: SpectroSERVER now able to manage SNMPv3 devices with duplicate engineIDs.
(10.2.2, DE285769, 00704767)
Symptom
: SpectroSERVER may run into 100% CPU during deletion of Fan-out model. 
Resolution
: SpectroSERVER never run into 100% CPU during deletion of Fan-out model.
(10.2.2, DE286647, 00687092)
Symptom
: Rare SpectroSERVER crash when Trap Director is enabled and alert_forwarding_connect_full_flush=false and landscape with duplicate IP models disconnects and reconnects. 
Resolution
: Resolved SpectroSERVER crash due to memory corruption.
(10.2.2, DE289687, 00668193)
Symptom
: SpectroSERVER crashes while clearing condition correlation event having multiple implied symptoms. 
Resolution
: SpectroSERVER will not crash, while clearing condition correlation event having multiple implied symptoms.
(10.2.2, DE299926, 00704982)
Symptom
: SpectroSERVER crash due to conflicts between libvpn and libevpn Modules. 
Resolution
: Resolved conflicts between libvpn and libevpn Modules.
(10.2.2, DE305145, 00790490)
Symptom
: SS crashes, while performing SPM Test host discovery with Read Only option, on Device type SysEdge (Sim's - 29575, 28481). It is because the attribute 'EchoAdminSourceAddress' value is not present. 
Resolution
: Added condition to check the 'EchoAdminSourceAddress' value and Discovery on SysEdge devices (sim's - 29575, 28481) is successful.
(10.2.2, DE297360, 00760328)
Symptom
: SpectroSERVER may run into corba timeouts during the creation/modification of SpectroWatch. 
Resolution
: SpectroSERVER never run into corba timeouts during the creation/modification of SpectroWatch.
(10.2.2, DE310084, 00813294)
Symptom
: SpectroSERVER may crash during CDP discovery.
Resolution
: SpectroSERVER will not crash during CDP discovery.
(10.2.2, DE306090, 00789793)
Symptom
:  SpectroSERVER may crash during Interface Reconfiguration.
Resolution
: SpectroSERVER never crashes during Interface Reconfiguration.
(10.2.2, DE306724, 00794576)
Symptom
: SpectroSERVER may crash during model activation of Aruba Controller.
Resolution
: SpectroSERVER will not crash during model activation of Aruba Controller.
(10.2.2, DE312190, 00807150)
Symptom
: SpectroSERVER may crash during layer2 discovery of Ciena devices.
Resolution
: SpectroSERVER will not crash during layer2 discovery of Ciena devices.
(10.2.2, DE312911, 00708975)
Symptom
: SpectroSERVER may crash when the device is unreachable.
Resolution
: SpectroSERVER will not crash when the device is unreachable 
(10.2.2, DE302431, 00776622)
Symptom
: Excessive SS memory utilization reported due to IHIfTablePortPerf
Resolution
: Bugs identified in IHIfTablePortPerf are fixed so that the stale memory is deleted properly if not in use.
(10.2.2, DE301745, 00777637)
Fixes to NCM
Symptom
: The user is unable to resize the NCM sub-views.
Resolution
: Implemented a ComponenetResizer which is responsible for resizing the portlets.2.Registered all the NCM sub-views to be re sizable
(10.2.2, DE266297, 00637159)
Symptom
: When both primary and secondary servers are up and running in hot standby mode Fault tolerance setup, the user is getting incomplete NCM captures. But when secondary is not running, they are not seeing any incomplete captures. 
Resolution
: Controlled capture requests from secondary server when both primary and secondary are up and running in hot standby mode in Fault tolerance setup.
(10.2.2, DE278933, 00612039)
Symptom
: NCM capture is not working when the user set local credentials on a device. 
Resolution
: NCM capture is working when the user set local credentials on a device.
(10.2.2, DE294862, 00746515)
Symptom
: NCM capture fails with Unknown error and ArrayOutofBoundException. 
Resolution
: NCM capture succeeds without any error.
(10.2.2, DE288323, 00726640)
Symptom
: NCM capture fails with Unkown error and ArrayOutofBoundException. 
Resolution
: NCM capture succeeds without any error.
(10.2.2, DE299874, 00726640)
Symptom
: Password is shown in Windows Application Event Viewer debug logs while executing NCM script. 
Resolution
: Provided option to enable/disable debug log by giving TRAP signal to sradmin process.
(10.2.2, DE316436, 00764610)
Symptom
: NCM capture is not working when the user set local credentials on a device. 
Resolution
: NCM capture is working when the user set local credentials on a device.
(10.2.2, DE300969, 00746515)
Symptom
: Spectrum does not evaluate all configured NCM block policies in some edge cases. 
Resolution
: Spectrum will evaluate all configured NCM block policies correctly.
(10.2.2, DE301368, 00459013)
Symptom
: NCM task was getting executed for members of the wrong device family in some edge cases. 
Resolution
: NCM task will get executed only for members of the device family for which it was configured.
(10.2.2, DE302353, 00647324)
Symptom
: When 'Load firmware' NCM task is scheduled, a dialog titled 'Task parameters for schedule' shows the list of prompted 'upload firmware' script's additional parameters instead of 'load firmware script's parameters.
Resolution
: Selecting 'Load firmware' NCM task's schedule button displays a dialog titled 'Task parameters for schedule' with a list of prompted 'Load firmware' script's additional parameters.
(10.2.2, DE306075, 00753497)
Fixes to REST API
Symptom
: On Rest API call, the user gets an error when sending out model sync and it errors out stating ConcurrentModificationException. 
Resolution
: Model Sync Subscription rest call will be successful without any errors.
(10.2.2, DE297500, 00753431)
Symptom
: If no user logged to OC client, REST API was not returning the result. 
Resolution
: Now rest API will return a result, even if no user is logged into the OC client.
(10.2.2, DE303787, 00462201)
Fixes to WebClient
Symptom
: WebClient assignment quick filter stays gray. 
Resolution
: Quick filter is enabled even if there is only one unique value in the column to which filter is associated.
(10.2.2, DE280333, 00688765)
Symptom
: WebClient landscape list is not sorted. 
Resolution
: Landscape is sorted.
(10.2.2, DE280334, 00688772)
Symptom
: WebClient is not honoring the security string on Universe model.
Resolution
: Added code to honor security string on Universe Model for WebClient.
(10.2.2, DE292121, 00706911)
Symptom
: WebClient becomes unresponsive when there are bulk updates of alarms.
Resolution
: Bulk update of alarms is handled in a separate thread using Web Workers, main thread will be available for the user actions hence WebClient will be responsive.
(10.2.2, DE299838, 00749214)
Fixes to Discovery and Modeling 
Symptom
: Manual or Schedule AutoDiscovery failed to run due to queuing of background Discovery requests. 
Resolution
: Disabled the Background Discovery queuing requests when TopologyWrkSpce is locked by another discovery.
(10.2.2, DE295167, 00683646)
Symptom
: Modeling gateway CMDB export throwing "java cast exception" and "exported as two different types" error. 
Resolution
: Modeling gateway CMDB exports without any errors.\u003C/span.
(10.2.2, DE293156, 00728963)
Symptom: 
Description of discovery filter is not properly conveying its functionality.
Resolution
: Description of discovery filter is properly conveying its functionality.
(10.2.2, DE241092, 00521608)
Symptom
: When creating a Discovery Folder under Global Configuration in one OC, the folders are not created on the other OC servers. Folder sync across OCs is not happening. 
Resolution
: When creating a Discovery Folder under Global Configuration in one OC, the folders are created on the other OC servers. Folder sync across OCs is happening.
(10.2.2, DE301906, 00759522)
Fixes to OneClick
Symptom
: Null values from SNMP agent cause empty tables in OneClick.
Resolution
: Resolved handling of null SNMP responses when expected type is not variable length.\u003C/div\u003Cdiv/\u003C/div.
(10.2.2, DE277361, 00670285)
Symptom:
 The Alarm Statistics page in OneClick administration page was displaying the wrong alarm count. 
Resolution:
 The Alarm Statistics page in OneClick administration page will display the correct alarm count.
(10.2.2, DE286016, 00699577)
Symptom
: Device attributes do not get updated in the SRM DB, if the values are set to empty in OC. 
Resolution
: Device attributes will now be updated in the SRM DB, even if the values are set to empty in OC.
(10.2.2, DE283839, 00650922)
Symptom
: Unable to force configuration of 32bit or 64bit OC client. 
Resolution
: Provided customization support and documentation to allow for specific 32bit and 64bit OC client configurations.
(10.2.2, DE313681, 00831522)
Symptom
: Changing the Font size in OneClick Console by editing the preferences is not preserved. 
Resolution
: Changing the Font size in Preferences under OneClick Console View menu is preserved as expected.
(10.2.2, DE292250, 00743662)
Symptom
: FileSystems( RFC2790) of sim 29307 in OneClick shows only 105 entries ,but the mibtools has 163 entries.Similarly other device sim29308 also have 105 entries but the mibtools has 143 entries. 
Resolution
: OneClick fileSystems (RFC2790) table will display all the entries even when there is mismatch in sequence of index data in columns.
(10.2.2, DE300172, 00730178) 
Symptom
: When a LACP configured device is selected from OneClick -> Spotlight view ->LACP Device List, that device and the peer devices were not highlighted in topology view.
Resolution
: When a LACP configured device is selected from OneClick -> Spotlight view ->LACP Device List, that device and the peer devices are highlighted in the topology view.
(10.2.2, DE304476, 00711723)
Symptom
: The OC Webserver is going OutOfMemory while reading the client.log file when its size is very huge ~300MB or above. 
Resolution
: The OC Webserver will handle the reading of large client.log files as this solution has the optimized client.log file purging based on number of days and max entries logic in place.
(10.2.2, DE309552, 00809631)
Symptom
: Not able to save the WebClient preferences from OneClick server where the installation owner of OneClick server is present in only one SpectroSERVER in DSS environment.
Resolution
: WebClient preferences can be saved when installation owner  of OneClick server is present in only one SpectroSERVER in DSS environment 
(10.2.2, DE283491, 00688807)
Fixes to WLC
Symptom
: Spectrum shows "regular color" icons to represent Master Aruba WLC Controller and "faded color" icons to represent Backup Aruba WLC Controller.The "faded color" icons are added as a feature in Spectrum 10.1 to represent Backup Aruba WLC Controller only. Spectrum should be showing "regular color" icons to represent Access Points but currently it is showing the "faded color" icons.
Resolution
: Model simulation 18459 and check that it doesnt show faded green color suggesting that it isnt an Aruba Backup Controller.Faded green color should show up only for Master Controllers.
(10.2.2, DE278715, 00681212)
Symptom
: When AP gets remodeled then the AP moved from its container to the container of the WLC.
Resolution
: When AP gets remodeled then the AP not moved from its container to the container of the WLC.
(10.2.2, DE278924, 00681023)
Symptom
: When a WLC is moved from its container to a new container also the APs are moved on to the WLC container. . 
Resolution
: "Move Access Points along with WLC" option is set to "No", then APs remain in the container where they had been placed, even when WLC is moved from its container to a new container.
(10.2.2, DE296386, 00726975)
Fixes to Archive Manager
Symptom
: Archive Manager crash after client disconnect. .
Resolution:
Corrected code faults causing disconnected clients to be cleaned up prematurely.
(10.2.2, DE280357, 00672723)
Symptom:
Excessive Archive Manager memory usage, due to high numbers of attached event clients. 
Resolution
: Improved Archive Manager handling of event attachments, resulting in significantly reduced memory consumption.
(10.2.2, DE304156, 00783125)
Symptom
: The Archive Manager is unable to connect to the mysql database.
Resolution
: Connection problem was caused by improper localhost name resolution. An improved error message is to include a possible name resolution configuration problem.
(10.2.2, DE309522, 00808413)
Fixes to Alarm Filter
Symptom
: Alarm Duration value is displayed for Alarm Window as well.
Resolution
: Respective values displayed for Alarm Duration and Alarm Window.
(10.2.2, DE283449, 00705540)
Symptom
: Alarms of Landscape excluded in Alarm Filter are shown in WebClient. 
Resolution
: Fixed the WebcCient subscription code to honor the landscapes configured in Alarm Filter.
(10.2.2, DE299344, 00749281)
Symptom
: Service down alarms where not cleared in some cases even though the resource/device was up. . 
Resolution
: Service down alarms will be cleared correctly when the resource/device comes up. 
(10.2.2, DE289563, 00473323)
Symptom
: Interface model was asserting then clearing the BAD LINK DETECTED alarm every few seconds. 
Resolution
: Due to change in IPLS of connected device's port(DISABLED STATE) , this device's port has flapping bad link alarms .Resolved it by controlling the change in IPLS to 'link_status_good ' of second device when its link_condition is 'link_disabled'. .
(10.2.2, DE286542, 00712250)
Symptom
: Contact lost alarms asserted on pingable models that are actually reachable. 
Resolution
: Faulty behavior with pingable models is corrected and false contact lost alarms are not generated.
(10.2.2, DE295798, 00716859)
Symptom
: All the alarms are not displayed in "Alarms Log: All" and "Alarms Log: Selected Devices and Models". 
Resolution
: All the alarms will be displayed in "Alarms Log: All" and "Alarms Log: Selected Devices and Models".
(10.2.2, DE306550, 00707789)
Symptom
: LSP Down(0x4520104) alarm gives wrong title as "primary and backup paths are down". 
Resolution
: LSP Down Alarm (0x4520104) now gives right alarm Title.
(10.2.2, DE291094, 00639277)
Symptom
: For tunnel interfaces, alarms BAD LINK DETECTED are not cleared when tunnel interface is up again. 
Resolution
: For tunnel interfaces, alarms BAD LINK DETECTED will be cleared by next poll cycle when tunnel interface is up.
(10.2.2, DE300964, 00712464)
Integration Fixes 
Symptom
: Unable to integrate Spectrum 10.2.0 with VNA 2.1 .
Resolution:
Able to integrate Spectrum 10.2.0 with VNA 2.1 .
(10.2.2, DE284878, 00702316)
Symptom
: UIM Spectrum gateway events are not mapped to the proper UIMServerHost model when the Network_Address has been changed since SpectroSERVER startup. 
Resolution
: Changes to Network_Address on UIMServerHost models are now properly updated in the IP Address Registry, allowing proper mapping of traps and events.
(10.2.2, DE311884, 00820075)
Symptom
: Integration Parameters losses the SSL configuration in the Service Desk configuration page. 
Resolution
: Integration Parameters in the Service Desk configuration page are saved and restored correctly.
(10.2.2, DE301441, 00744843)
Fixes to Secure Domain Connector (SDC)
Symptom
: SDC traps contain incorrect varbind values for unsigned 32bit data types.
Resolution
: Resolved issue causing incorrect varbind values for unsigned 32bit data types.
(10.2.2, DE287488, 00717832)
Symptom
: SDC traps contain incorrect varbind values for unsigned 32bit data types. 
Resolution
: Resolved issue causing incorrect varbind values for unsigned 32bit data types.
(10.2.2, DE286012, 00717832)
Symptom:
Secure Domain Connector creating invalid alarms when under heavy load( hundreds of requests creating hundreds of threads ). 
Resolution
: Secure Domain Connector re-architected to efficiently manage high volumes of SNMP requests using just a few native threads.
(10.2.2, DE305632, 00788951)
Fixes to SNMP
Symptom
: Spectrum not processed Syslog SNMP traps for devices of model type AironetIOS.
Resolution
: Spectrum processed Syslog SNMP traps for devices of model type AironetIOS.
(10.2.2, DE288607, 00708457)
Symptom
: Alarm not getting generated on Cisco Apic model type./\u003C/div.
Resolution
: Setting register_for_alerts attribute to true for the said model type.\u003C/div.
(10.2.2, DE289132, 00723041)
Symptom
: Unable to easily import Spectrum events into other applications.
Resolution
: Added functionality to create file to log events in JSON format.
(10.2.2, DE289426, 00732363)
Symptom
: Excessive SNMP table reading due to CsIHVoiceApp intelligence. 
Resolution
: Removed unnecessary CsIHVoiceApp intelligence.
(10.2.2, DE313207, 00829622)
Symptom
: SNMPv2 enterprise traps received via Secure Domain Connector are not mapped properly due to corrupted trap OID. . 
Resolution
: SNMpv2 enterprise traps received via Secure Domain Connector are now mapped properly.
(10.2.2, DE291489, 00740363)
Fixes to Reporting Manager
Symptom
: CA Spectrum cannot integrate with CABI Jasper 6.3 Server which is not shipped with CA Spectrum.
Resolution
: CA Spectrum can integrate with CABI Jasper 6.3 Server which is shipped/not-shipped with CA Spectrum.
(10.2.2, DE291670, 00741722)
Fixes to Certifications
Symptom
: MPLS LSPs are not discovered for some juniper and cisco devices. 
Resolution
: RFC MIB is supported in place of old mpls to draft mib\u003CdivJuniper. New MIB table is supported in place of deprecated mib table\u003C/div\u003CdivInitial fix with the changes provided to the user, but the user has reported a crash\u003C/div\u003CdivDebug. Logs are in place for testing in the user environment.
(10.2.2, DE308693, 00591489, 00711763)
Symptom
: In MIB Tools 90 percent of all MIBs are displayed under the "unknown" folder.
Resolution
: MIBs are structured properly under corresponding enterprise vendor names.
(10.2.2, DE306138, 00765084)
Symptom
: The user cannot change the Font Size under Preferences.
Resolution
: The user can change the Font sizes under Preferences as expected.
(10.2.2, DE306301)
Miscellaneous 
Symptom
: Show utility of spectrum smd is showing junk characters for MAC address of interfaces.
Resolution
: In case value is valid mac, converting it to hex string.
(10.2.2, DE307656, 00796587)
Symptom
: Event Configuration Editor takes 10 minutes to load events when launched from remote computer when there is a network latency between OneClick Server and OneClick Client.
Resolution
: Event Configuration Editor loads the events in reasonable time.
(10.2.2, DE311628, 00815308)
Symptom
: XSS Vulnerability found for URL: https://localhost/spectrum/common/do/about
Resolution
: The URL: https://localhost/spectrum/common/do/about is now free from XSS Vulnerability attack.
(10.2.2, DE311216, 00808800)
Symptom
: After tomcat restart, CPU usage  is very high for a long time.
Resolution
: This issue is fixed, after Tomcat is restarted, there will not be any high CPU usage.
(10.2.2, DE287497, 00723864)
Symptom
: Event counts are same for Weektodate and Monthtodate.
Resolution
: Modifies the SQL query to get the correct event count .
(10.2.2, DE317876, 00790999)
Symptom
: Example SSL configuration is not using modern security recommendations. 
Resolution
: Example SSL configuration provided is now using modern ciphers and protocols, added visibility into http/https and port configuration in OC client status bar.
(10.2.2, DE34593)
Symptom
: NetworkLinkType attribute is not updated based on DataRelayClass value of the device. 
Resolution
: NetworkLinkType attribute is now updated based on DataRelayClass value of the device.
(10.2.2, DE281236, 00669133)
Symptom
: Spectrum is not reading q-bridge vlan forwarding table to resolve connections if no proper data is available from transparent bridge forwarding table. 
Resolution
: \u003Cspan style="font-size: 12px;"Spectrum reads q-bridge vlan forwarding table to resolve connections,even if no proper data is available from transparent bridge forwarding table.\u003C/span.
(10.2.2, DE291811, 00647433)
Symptom
: Error due to bad var bind entry in event format file. 
Resolution
: This issue resolved by changing var bind text in eventformat file.
(10.2.2, DE295306, 00753875)
Symptom
: pingCtlType OID gets truncated due to incorrect length. 
Resolution
: Fixed the logic to calculate the correct length for pingCtlType OID value. \u003C/div.
(10.2.2, DE285126, 00661907)
Symptom
: If a device has more than 100 routing entries per VRF on selecting the VRF from PerVRF list, IP Routing table fetches and displays first 100 rows on clicking Get Next, routing entries of default vrf are getting displayed instead of the selected vrf. 
Resolution
: Code changes are done to fix the defect.
(10.2.2, DE285365)
Symptom:
 Error Message due to dupllicated event rules in EventDisp file. 
Resolution
: Duplicated Entries in EventDisp file is removed.
(10.2.2, DE285794, 00698325)
Symptom
: Log file is filling up with UnknownHostException. 
Resolution
: Log file is not filling up with UnknownHostException.
(10.2.2, DE300175, 00747839)
Symptom
: In 10.2.1, When we Edit any custom trap in MIB tools, initially it is 'Custom' but after restarting the SS this will be mapped as 'CA'. 
Resolution
: Even if the custom vendor name is not exist for custom event, It will be showed as 'Custom' in Trap Support table.
(10.2.2, DE301893, 00724308)
Symptom
: Snmptrap in EventCode 0x002104b2 not being translated properly. 
Resolution
: Snmptrap in EventCode 0x002104b2 translated properly.
(10.2.2, DE302163, 00774221)
Symptom
: Though old and new value are null, still the db update was happening with null value for SLA. 
Resolution
: if there is no change in value, db update will not happen.
(10.2.2, DE303470, 00723864)
Symptom:
Reset Authentication functionality is not working properly. 
Resolution
: Reset Authentication functionality now works properly.
(10.2.2, DE294490, 00751584)
Symptom
: Spectrum does not respond to a CAPC sync request within the timeout interval.
Resolution
: Performance improvement during DEVICE_ADD phase of Spectrum - CAPC incremental sync.
(10.2.2, DE248160, 00502175)
Symptom
: ECE issues persist after Spectrum_10.02.01.PTF_10.2.152 provided to Verizon.
Resolution
: The user can  save multiple specific events.  The author is set to custom after an event message has been modified/saved in Event Configuration Editor.
(10.2.3, DE315322, 00833690)
Issues Resolved in CA Spectrum 10.2.1
Fixes to Alarm Management
Symptom:
All the variable bindings in the Huawei CRC traps are not mapped.
Resolution:
All the variable bindings in the Huawei CRC traps are now mapped.
(10.2.1, DE242614, 00517668)
Symptom:
SNMP Authentication Failure trap for the Cisco Nexus devices does not pass the IP of the offending device in Event Message.
Resolution:
SNMP Authentication Failure trap for the Cisco Nexus devices now passes the IP of the offending device in Event Message.
(10.2.1, DE238088, 00484956)
Symptom:
When two pingable devices are having the same IP address and If one device is put in maintenance, then the Other device is raising "Device not responding to poll" alarm.
Resolution:
When two pingable devices are having the same IP address and If one device is put in maintenance, then the Other device will not raise "Device not responding to poll" alarm.
(10.2.1, DE264279, 00473242)
Symptom:
0x11c048a event is raised on every poll cycle when Cat29608TC device is down.
Resolution:
0x11c048a event is not raised on every poll cycle when Cat29608TC device is down.
(10.2.1, DE264899, 00613188)
Symptom:
When the "Unresolved Fault Alarm disposition" setting is set to alarm on device in fault domain, unresolved fault alarm is generated for devices in maintenance mode also in addition to device in fault domain.
Resolution:
Unresolved Fault Alarm is not generated for devices in maintenance mode and is generated only on device in fault domain.
(10.2.1, DE267861, 00364337)
Symptom:
SYSLOG Traps for NEXUS devices are not processed.
Resolution:
SYSLOG trap mapping for NEXUS devices is supported and these traps are processed appropriately.
(10.2.1, DE269128, 00611722)
Symptom:
Event 0x10d35 is showing a discrepancy between the actual Event Message and the Event Message listed in Event Configuration.
Resolution:
Events that have rules shows actual Event Message and the Event Message listed in Event Configuration.
(10.2.1, DE274246, 00644628)
Fixes to Archive Manager
Symptom:
Archive Manager crashes when using event filters in OneClick.
Resolution:
Archive Manager will not crash when using event filters in OneClick.
(10.2.1, DE271826, 00509819)
Symptom:
Primary ArchMgr crash during Fault-Tolerant DDM database synchronization.
Resolution:
Resolved performance problem at the root of the Fault-Tolerant DDM database synchronization process.
(10.2.1, DE273457, 00658278)
Fixes to Certifications
Symptom:
MIB compilation fails with error message: "The selected file appears to contain more than one MIB definition.".
Resolution:
MIB compilation will be successful without any error message.
(10.2.1, DE264678, 00632728)
Symptom:
In the Component details, entity sub view for Cisco 3850 devices, physicalEntitiyClass column value is not mapped to corresponding description for the cases where these values are greater than 11.
Resolution:
Updated the MIB with the current version (RFC6933) and the physicalEntitiyClass value is mapped to its definition and is displayed correctly.
(10.2.1, DE266048, 00620853)
Symptom:
Serial number is not shown for Cisco VSS devices in the list view of the OneClick console.
Resolution:
Serial number is displayed appropriately for Cisco VSS devices in the list view of the OneClick console.
(10.2.1, DE269082, 00612482)
Symptom:
Cisco IE 4000 series devices are not correctly certified in Spectrum.
Resolution:
Cisco IE 4000 series devices are correctly certified in Spectrum.
(10.2.1, DE274697, 00655038)
Symptom:
The user is unable to see the interfaces of the device modeled as 6G3XX model type.
Resolution:
Created a new modeltype to support interface modeling for entrasys device.
(10.2.1, DE276935, 00500349)
Fixes to Discovery and Modeling
Symptom:
Discoveries fail to launch after system reboot.
Resolution:
Discoveries will run at scheduled time after system reboot.
(10.2.1, DE247785, 00591953)
Symptom:
After management lost alarms, many VM models are changing their IP from the management IP to production IP.
Resolution:
Based on VMWare_vmDNSLookonVNMRestart Spectrum will determine if the IP needs to be updated or not.
(10.2.1, DE254513, 00598672)
Symptom:
Connection to Pingable device is NOT created when it is directly connected to a pure L3 router.
Resolution:
Added the support for L3 connection to pingable, on demand.
(10.2.1, DE268683, 00456695)
Symptom:
The LACP threshold violation alarms were not getting raised for Cisco 4510 and Juniper MX series devices.
Resolution:
The LACP threshold violation alarms are created and cleared correctly on Cisco 4510 and Juniper MX series devices.
(10.2.1, DE277412, 00645497)
Fixes to Install
Symptom:
Packtool does not pack all the required files (ssroe_evnt_en_US.prf and ssroe_alrm_en_US.prf files are missing).
Resolution:
Packtool bundles and copies all the required files appropriately.
(10.2.1, DE274635, 00527796)
Fixes to NCM
Symptom:
When device configuration contains special characters, NCM asserts incorrect error - "Unable to connect to the ncmservice".
Resolution:
When the device configurations contain special characters, NCM reports appropriate error as follows. “Unable to process. Device configuration data contains special characters".
(10.2.1, DE244268, 00580195)
Symptom:
Cisco and Juniper NCM Captures and uploads using SSH configuration fail with premature EOF error.
Resolution:
An alternate solution using JSCH SSH libraries is made available for users to perform NCM Captures and uploads using SSH configuration for Cisco and Juniper devices. Users encountering premature EOF error during captures or uploads can switch to use this solution by setting the following in SPECROOT\\NCM\\config.xml file: <ssh-library type="java.lang.String">jsch</ssh-library>.
(10.2.1, DE278541, 00425629)
Symptom:
 SpectoSERVER Crashes on performing NCM Sync Task.
Resolution:
 SpectoSERVER does not crash on performing NCM Sync Task.
(10.2.1, DE275167,00635499)
Fixes to OneClick
Symptom:
The "Warning - There are XXX elements under the node to be expanded. Are you sure you want to expand it?" prompt does not go away after selecting No. It only goes away after selecting "No" a bunch of times.
Resolution:
Warning prompt will come only once and on selecting "No", it goes away.
(10.2.1, DE202744, 00469512)
Symptom:
Unknown string (jceUnlimitedStrength) appears in the OneClick JRE install panel for Japanese, Simplified Chinese, and Traditional Chinese versions.
Resolution:
Unknown string (jceUnlimitedStrength) do not appear in the OneClick JRE install panel for Japanese, Simplified Chinese, and Traditional Chinese versions.
(10.2.1, DE264933, 00632478)
Symptom:
When we run locator searches on Process models, we get duplicate models.
Resolution:
 Code changes are done to not create duplicate process models.
(10.2.1, DE265194, 000581471)
Symptom:
Unknown log entries are seen in Spectrum Control Panel(VNM.OUT).
Resolution:
Unknown log-entries are no more seen in Spectrum Control Panel or VNM.OUT.
(10.2.1, DE266961, 00640407)
Symptom:
In OneClick console, if we try to edit the font from Topology preferences and click cancel, it works as OK button and saves the update.
Resolution:
Clicking Cancel button after trying to edit font will discard the changes in OneClick preferences tab.
(10.2.1, DE271939, 00643109)
Symptom:
After upgrading to Spectrum 10.2 release, noticed that the Alarm severity sort order in the OneClick client is changed to "Critical, Maintenance, Major, Minor".
Resolution:
Alarms severity sort order is updated to list in appropriate order (Critical, Major, Minor, Maintenance).
(10.2.1, DE269160, 00645692)
Symptom:
If a model is deleted from OneClick, and if the same model is highlighted in the Navigation -> Explorer tab and in Contents-> Topology tab, focus changes to alarms tab after the model is deleted.
Resolution:
Focus remains in Topology tab even after the device deleted is the one highlighted in Navigation -> Explorer tab and in Contents-> Topology tab.
(10.2.1, DE275342, 00654856)
Fixes to Performance Manager (SPM)
Symptom:
The user is not able to specify the source address when configuring SPM Jitter tests.
Resolution:
IP address provided in Alternate Packet Address field in the Advanced Tab will be used as rttMonEchoAdminSourceAddress. In case, if a valid IP address is not provided here, test host address will be used as rttMonEchoAdminSourceAddress.
(10.2.1, DE197502, 00441877)
Fixes to Report Manager
Symptom:
Spectrum Jasper reports are taking long time to open and consume more memory.
Resolution:
Spectrum Jasper reports are optimized to perform better than earlier.
(10.2.1, DE269954, 00503003)
Symptom:
Launching Availability Details report fails due to incorrect OneClick Hostname.
Resolution:
Availability reports are launched correctly.
(10.2.1, DE274684, 00632455)
Symptom:
After the Tomcat restart if the user immediately clicks the Report Manager link, navigation page displays exception details instead of appropriate error message.
Resolution:
After the Tomcat restart, if the user clicks the Report Manager link even before SRM has not started, message saying "SRM not finished starting" will be displayed.
(10.2.1, DE277486, 00632087)
Symptom:
Availability report is not generated.
Resolution:
After making changes, availability report is generated.
(10.2.3, DE334210, 00915575)
Fixes to ReST API
Symptom:
REST API returning multiple of the same models.
Resolution:
REST API will return single instance of model information.
(10.2.1, DE254796, 00607162)
Symptom:
When issuing a REST GET model request with one or more attr parameters, a NullPointerException is returned.
Resolution:
REST GET model request with one or more attributes parameters returns successfully.
(10.2.1, DE275918, 00658418)
Fixes to Secure Domain Connector (SDC)
Symptom:
Secure Domain Connector (SDC) always listens for SNMP traps and SDM connections on all interfaces.
Resolution:
Extended Secure Domain Connector (SDC) functionality to allow IP-specific binding for SNMP traps and SDM connections.
(10.2.1, DE263283, DE277930, 00627431)
Symptom:
SpectroSERVER not establishing connection to Secure Domain Connector (SDC).
Resolution:
Resolved deadlock preventing SDC connections from being established.
(10.2.1, DE277727, 00679511)
Symptom:
Secure Domain Connector (SDC) installation does not register the service and VC++ 2013 redist is not installed if SDC installation is launched from sdmc/nt/install.exe.
Resolution:
Secure Domain Connector (SDC) installs and registers the service successfully when the SDC installation is launched from sdmc/nt/install.exe.
(10.2.1, DE278945)
Fixes to SNMPv3
Symptom:
When using an invalid SNMPv3 profile to contact a device in MIB Tools, the following error is displayed: com.aprisma.spectrum.app.mib.common.unexpectedError.snm.
Resolution:
Corrected the error message with a valid string, when using an invalid SNMPv3 profile to contact a device in MIB Tools.
(10.2.1, DE250262, 00513444)
Fixes to SpectroSERVER
                    
Symptom:
Rare but consistent SpectroSERVER hangs due to multiple problems with the SNMP subsystem. Symptoms can include failed online backups, failed shutdowns, and invalid management agent lost alarms.
Resolution:
Major overhaul of SNMP subsystem, which is designed to improve efficiency and stability.
(10.2.1, DE198464, 00454502)
Symptom:
SpectroSERVER hangs while deleting Wireless Access Points and is not able to discover new devices.
Resolution:
SpectroSERVER no longer hangs while deleting Wireless Access Points and can discover new devices.
(10.2.1, DE241741, 00526731)
Symptom:
Rare SpectroSERVER crash on startup when using custom AlertMaps.
Resolution:
Resolved memory fault causing SpectroSERVER crash.
(10.2.1, DE242230, 00507304)
Symptom:
SpectroSERVER crashes on an event procedure when casting to a text attribute without using "ToString" for conversion in EventDisp file.
Resolution:
SpectroSERVER does not crash and reports appropriate error when casting a text attribute without using "ToString" in a EventDisp file.
(10.2.1, DE247803, 00516539)
Symptom:
SpectroSERVER crashes sporadically in the Fault tolerant use-case.
Resolution:
Sporadic crash is addressed by optimizing some stale code.
(10.2.1, DE255514, 00614994)
Symptom:
SpectroSERVER crashes while updating the Aruba Controller Role Change.
Resolution:
SpectroSERVER does not crash while updating the Aruba Controller Role Change.
(10.2.1, DE264680, 00628541)
Symptom:
Compilation of customized C++ SSORB application fails due to missing libWrapper.so library with Spectrum installation.
Resolution:
Spectrum installation is bundled with libWrapper.so library required for compiling C++ SSORB applications.
(10.2.1, DE273496, 00656896)
Symptom:
SpectroSERVER crashes intermittently while updating Wireless Access Points modeling.
Resolution:
SpectroSERVER not crashing intermittently while updating Wireless Access Points modeling.
(10.2.1, DE281083, 00674444)
Symptom:
processed --restart not working properly on Linux.  Duplicate processes are started due to not detecting orphaned children when using soft-linked executables.
Resolution:
Orphaned children are now resolved using /proc/<pid>/cmdlne and not /proc/<pid>/exe on Linux, resolving confusion with soft-linked executables.
(10.2.1, DE281615, 00691705)
Symptom:
Frequent connection lost between MLS and secondary SpectroSERVER.
Resolution:
Connection between MLS and secondary SpectroSERVER will be stable.
(10.2.1, DE282434, 00512582)
Symptom:
 Spectrum 10.2 crashed with AlarmSnoozeService.
Resolution:
 The SpectoSERVER will no longer crash with AlarmSnoozeService.
(10.2.1, DE265177, 00633417)
Fixes to UIM Integration 
Symptom:
UIMHost models added into Global Collection, do not appear in the Topology view.
Resolution:
UIMHost models added into Global Collection, should appear in the Topology view.
(10.2.1, DE266095, 00624925)
Symptom:
Spectrum is incorrectly synchronizing physical address models to UIM during bi-directional sync process.
Resolution:
UIM bi-directional sync process performs sync correctly, filtering out the physical address models.
(10.2.1, DE275931, 00623009)
Fixes to VPN Manager
Symptom:
VPN discovery from VPM Manager offers filter where wildcards can be used if needed. However, " * "wildcard is always applied to the filter even when it is not appended at the end of the search string thereby excluding all VPNs that are having similar starting name.
Resolution:
Handled the filter logic to apply wildcard search only if the " *  " symbol exists in search string. Otherwise it will go for the exact string comparison.
(10.2.1, DE271898, 00651647)
Symptom:
When VPN discovery is re-run after making device level route target configuration changes, stale site associations still exist.
Resolution:
When VPN discovery is re-run after making device level route target configuration changes, stale site associations are deleted.
(10.2.1, DE277325, 00479666)
Issues Resolved in CA Spectrum 10.2
Fixes to Alarm Management
Symptom:
 Dialer models are raising alarms incorrectly when attached interfaces are down.
Resolution:
 Dialer models are raising alarms correctly when attached interfaces are down.
(10.2.0, DE157218, 00317268)
Symptom:
 Mobile Station MAC address in Upload/Download volume alarms for WLC show gibberish characters. 
Resolution:
 Handled different types of MAC address values coming from device MIB. Now, Upload/Download volume alarms for WLC are displayed appropriately with colon separated hex valued Mobile Station MAC address.
(10.2.0, DE153797, 00304353)
Symptom:
 Alarms are cleared while using the event variable 76620 (dynamic alarm title) as a discriminator 
Resolution:
 Alarms are cleared while using the event variable 76620 (dynamic alarm title) as a discriminator.
(10.2.0, DE163319, 00380757)
Symptom:
 EventDisp entry messed up - 0x06330076 E 250x05420101 in CsVendor/gen_app_gw/EventAdmin/EventDisp file 
Resolution:
 Entries in CsVendor/gen_app_gw/EventAdmin/EventDisp file are shown properly, one Event per line.
(10.2.0, DE161540, 00358050)
Symptom:
 Varbind 5 used twice in the same event rule 
Resolution:
 Removed the additional varbind used in the event rule to solve the issue.
(10.2.0, DE176387)
Symptom:
 Alarm view shows "Blade Status Unknown" secondary alarm on suppressed devices even with the default 'hide symptom alarms' filter.
Resolution:
 Fixed the Event configuration in the EventDisp to avoid this.
(10.2.0, DE198468, 00199996)
Symptom:
 Alarms are not getting loaded for few global collections. 
Resolution:
 Alarms are getting loaded for all Global collections.
(10.2.0, DE227369, 00475649) 
Symptom:
 The Last Occurrence attribute is not set properly for alarms on Solaris.
Resolution:
 The Last Occurrence attribute is now properly set on all platforms.
(10.2.0, DE247806, 00530748)
Fixes to Alarm Notifier and SANM
Symptom:
 Date and Time values are missing from the Event Message in Alarm Notifier output. 
Resolution:
 Date and Time values are set appropriately in the Event Message of Alarm Notifier.
(10.2.0, DE142807, 00263657)
Symptom:
 Event from AlarmNotifier shows the Integer value instead of the enumerated value from the event table. 
Resolution:
 Event from AlarmNotifier shows the enumerated value from the event table.
(10.2.0, DE231909, 00338059)
Fixes to Archive Manager
Symptom:
 Excessive connections to ArchMgr trigger low-thread condition, triggering excessive .moot.trace dumps. 
Resolution:
 Improved VnmShd to persist ArchMgr connections like SS connections are, limited .moot.trace dumps to 10 due to low-thread condition.
(10.2.0, DE175728, 00425879)
Symptom:
 ArchMgr fails to log events with vardata larger than 65k. 
Resolution:
 Changed vardata_string mysql datatype to mediumtext (16M max size) from text(65k max size). Only new DDM databases will default to 16M, contact support for steps to migrate existing databases to larger data size.
(10.2.0, DE203711, 00441561)
Symptom:
 Excessive connections to ArchMgr trigger low-thread condition, triggering excessive .moot.trace
dumps.
Resolution:
 Improved VnmShd to persist ArchMgr connections like SS connections are, limited .moot.trace dumps to 10 due to low-thread condition.
(10.2.0, DE238125, 00514470)
Fixes to Auto Discovery
Symptom:
 The "Discovered DNS Name" column is not populated for pingable devices in an AutoDiscovery result set. 
Resolution:
 The "Discovered DNS Name" column is now populated correctly for pingable devices in an AutoDiscovery result set.
(10.2.0, DE144571, 00329316)
Fixes to CLI
Symptom:
 When a user executes SEEK command to find the models for which the eHealth mapping is enabled, SpectroSERVER is crashing. 
Resolution:
 The user will be able to execute SEEK command from CLI.
(10.2.0, DE171969)
Fixes to CA PC Integration
Symptom:
 The bad characters in the CA PC alert cause the integration to fail to send the alarm to Remedy. 
Resolution:
 Removed the bad characters, users will be able to see the ticket for CA PC alarm.
(10.2.0, DE158511, 00306330)
Symptom:
 CA PC event/alarm is missing for DLCI port interfaces in SPECTRUM, as mapping is not happening for DLCI ports. 
Resolution:
  CA PC event/alarm will be shown on DLCI port interfaces in SPECTRUM.
(10.2.0, DE33860, 00194827)
Symptom:
 Events sent from CAPC Event Manager for different CPU or Memory components are not creating separate alarms in Spectrum. 
Resolution:
  Separate alarms will be created for the events sent from CAPC Event Manager for different CPU or Memory components.
(10.2.0, DE161851, 00338183)
Fixes to Certifications
Symptom:
 Syslog Events for Cisco ASA devices not working. 
Resolution:
 Added Syslog support for Cisco ASA devices.
(10.2.0, DE158440, 00356864)
Symptom:
 NewMM.pl script is not converting Cat 4500X - 16 SFP device with sysOID of 1.3.6.1.4.1.9.1.1605 modeled as GnSNMPDev. 
Resolution:
 NewMM.pl script will convert Cat 4500X - 16 SFP device with sysOID of 1.3.6.1.4.1.9.1.1605 modeled as GnSNMPDev.
(10.2.0, DE159358, 00294714)
Symptom:
 Incorrect DeviceType value is set for sysObjectID 1.3.6.1.4.1.9.1.1208.
Resolution:
 DeviceType value for sysObjectID 1.3.6.1.4.1.9.1.1208 is set correctly.
(10.2.0, DE241256, 00523461) 
Fixes to EC Editor
Symptom:
 The SingleEvent rules do not work correctly when created using Event Configuration editor and generates the reset event instead of the target event. 
Resolution:
 The SingleEvent rules work correctly when created using Event Configuration Editor.
(10.2.0, DE162820, 00296320)
Fixes to EI Integration
Symptom:
 EI3.0 fails to read the new pcause file properly because pcause and event format files generated by Spectrum 10.1 jmib tool has \\000a and \\000d as unicode for linefeed and carriage return. 
Resolution:
 Unicode conversion skipped for following characters: a) Line Feed b) Form Feed c) Carriage Return d) Vertical Tab and e) Horizontal Tab.
(10.2.0, DE249262, 00584264) 
Symptom:
 EI 3.0 unable to decode the event variable that has line feed character. 
Resolution:
 EI will be able to decode the event variable that has line feed character.
(10.2.0, DE249263, 00527380)
Fixes to Install
Symptom: 
CA Spectrum Installation runs in compatibility mode on Windows 2012R2 computer.
Resolution:
 The requisite of setting compatibility mode on Windows 2012R2 computer is fixed.
(10.2.0, DE205037)
Fixes to MIB Tools
Symptom:
 When an attribute is mapped to an OID from a MIB file in MIB Tools, can see the data from the MIB tool and not from the "Attributes" tab of the device. 
Resolution:
 When an attribute is mapped to an OID from a MIB file in MIB Tools can see the data in "Attributes" browser of the device.
(10.2.0, DE139179, 00305465)
Symptom:
 Unable to perform SNMP set with IP Address as a value in MIB tools. 
Resolution:
 The user will be able to perform SNMP set in MIB Tools with IP Address as value.
(10.2.0, DE158760, 00240795)
Fixes to Modeling
Symptom:
 Unable to use NCM as Cisco 819 series devices are modeled as GnCiscoDev and the Device Type is Cisco ASR9000LC. 
Resolution:
 
The user can perform NCM operations with Cisco 819 series devices modeled as Rtr_Cisco type.
(10.2.0, DE156812, 00345236)
Symptom:
 On the GnSNMPDev model, you will see that duplicate modules are created.  
Resolution:
 On the GnSNMPDev model, you will not see that duplicate modules are created. 
(10.2.0, DE158076, 00335565)
Symptom:
 Multiple entries of "Unnamed” are created in LostFound container for CiscoUCSBlade Modules.
Resolution:
 "Unnamed" entries in LostFound container for CiscoUCSBlade Modules are not created.
(10.2.0, DE166489, 00413222, 00377355)
Symptom:
 An Error message "Adding duplicates to ModelHandleSet! Stack:" gets reported in VNM.out file. 
Resolution:
 Handled the scenarios that lead to this error message.
(10.2.0, DE175710, 00426060)
Symptom:
 A duplicate AP model with same MAC and different IP is created. 
Resolution:
 No duplicate AP model is created, instead existing AP model is updated with latest information.
(10.2.0, DE156515, 00323448)  
Symptom:
 Missing interfaces when creating devices of Model type NSFirewallVPN. 
Resolution:
 All the Interfaces are created with proper hierarchy when creating devices of Model type NSFirewallVPN.
(10.2.0, DE244482, 00507135) 
Fixes to Modeling Gateway
Symptom:
 Multi-line attributes are not exported or imported properly through modeling gateway. 
Resolution:
 Multi-line attributes are now properly exported and imported through modeling gateway.
(10.2.0, DE143337, 00317448)
Symptom:
 Modeling gateway import causes memory leak in SpectroSERVER process on using "ip_dnsname" tag with hostname in import file and the hostname cannot be resolved. 
Resolution:
 Modeling gateway import do not cause memory leak in SpectroSERVER process using "ip_dnsname" tag with hostname not resolved in import file.
(10.2.0, DE174526, 00424039) 
Symptom:
 While performing Modeling gateway, CMDB export was failing with an NULL Pointer Exception. 
Resolution:
 Re-factored the code to handle proper NULL Exceptions and after the fix, exporting of the Modeling gateway CMDB, works fine.
(10.2.0, DE177100, 00377556)
Symptom:
 No connections discovered between devices on using the attribute discover_connections="true" in the import files for the modeling gateway import. 
Resolution:
 Connections were discovered between devices on using the attribute discover_connections="true" in the import files for the modeling gateway import.
(10.2.0, DE249854, 00448433) 
Fixes to OneClick
Symptom:
When trying to create a user in a group, it gets created at root instead of the designated group. When users get created at root, it loses all its privileges and cannot log in to OneClick. 
Resolution:
 Users will be created properly under the designated group and will retain group's privileges as expected.
(10.2.0, DE200209, 00424835)
Symptom
: Instance values are displayed for columns in Avaya Media Server OC Views instead of actual values.
Resolution:
 The Station, Data Module and Partition table columns now displays "actual value" instead of "Instance value".
(10.2.0, DE144138, 00322552)
Symptom:
 Email Configuration does not use domain name. Domain is not considered while sending email even though it is provided in OC admin page. 
Resolution:
 Both smtphost and domain name provided in Email Configuration in OC Admin page are used for sending email.
(10.2.0, DE156898, 00344675)
Symptom:
 Serial number and Firmware version for Cisco Wireless Controllers are not shown in OneClick views. 
Resolution:
 Serial number and Firmware version for Cisco Wireless Controllers are shown in OneClick views.
(10.2.0, DE165011, 00377775)
Symptom:
 Incorrect privilege names getting displayed for LACP table under user privileges.
Resolution:
 Correct privilege names will be displayed for LACP table under user privileges.
(10.2.0, DE250440, 00601712)
Symptom:
 OneClick client not properly showing landscape in UI when landscape handle is 8192(0x80000000). 
Resolution:
 Resolved coding flaw preventing landscape handle of 8192 from being properly rendered in the hierarchy.
(10.2.0, DE203131, 00307061)
Fixes to Performance Manager (SPM)
Symptom:
 After SPM test hosts discovery, SPM Tests get duplicated and stop running. 
Resolution:
 After SPM test hosts discovery, SPM tests run as expected and do not get duplicated. 
(10.2.0, DE247722, 00444033)
Symptom:
 During SPM test discovery, TCP-CONNECT IPSLA tests are not discovered. 
Resolution:
 During SPM test discovery, TCP-CONNECT IPSLA tests are discovered.
(10.2.0, DE201582, 00454341)
Symptom:
 Unable to run RTT reports for the tests (ICMP, FTP, DHCP) created in SPECTRUM. 
Resolution:
 RTT reports for the all the tests (ICMP, FTP, DHCP) created in SPECTRUM can be run without any errors.
(10.2.0, DE157383, 00293287)
Symptom:
 SPM buckets do not get processed due to apostrophe in destination address of HTTP test. 
Resolution:
 SPM buckets will now get processed even if there are apostrophe in destination address of HTTP test.
(10.2.0, DE245497, 00580751) 
Symptom:
 After SPM test hosts discovery, SPM Tests get duplicated and stop running.
Resolution:
 After SPM test hosts discovery, SPM tests run as expected and do not get duplicated.
(10.2.0, DE247722, 00444033)
Symptom:
 When theTest_Host_Address of RTM Test Host is different from the Network_Address of the device, Unnamed RTM Test Host is created after the SS restart 
Resolution:
 When theTest_Host_Address of RTM Test Host is different from the Network_Address of the device, Unnamed RTM Test Host is not created after the SS restart
(10.2.0, DE34602, 22040101) 
Fixes to Policy Manager
Symptom:
 Using Policy Manager to update a "real" type attribute fails and results in garbage data for the attribute.  
Resolution:
 Using Policy Manager to update a "real" type attribute succeeds and the attribute gets updated correctly. 
(10.2.0, DE138413, 00274934)
Fixes to Report Manager
Symptom:
 Instance title for the schedule reports does not get updated. 
Resolution:
 Instance title for the schedule reports will now be shown correctly.
(10.2.0, DE156535, 00205128) 
Symptom:
 Parameter page does not list all the groups for “Group (Devices Only)” reports. 
Resolution:
 Parameter page for “Group (Devices Only)” “reports will now list all the groups.
(10.2.0, DE156536, 00267147) 
Symptom:
 Top-N Alarm reports drill down and RTT report generation is not possible. 
Resolution:
 Alarms reports are fixed to allow drill down and RTT reports can be generated.
(10.2.0, DE156543, 00267795) 
Symptom:
 After upgrading to Spectrum 10.0, Outage Log reports show "No Records found". 
Resolution:
 Outage Log reports are generated successfully and will display correct data.
(10.2.0, DE156544, 00254876)
Symptom:
 Device and Group information do not load or load very slowly in parameter page. 
Resolution:
 The parameter page for Group and Devices only reports will load in reasonable time.
(10.2.0, DE157769, 00303324)
Symptom:
 Include and Exclude option in parameter page for event reports does not work after upgrade to 10.1. 
Resolution:
 Include and Exclude option in parameter page for event reports works as expected.
(10.2.0, DE161193, 00317935) 
Symptom:
 The Availability report for SLA Detail by the user shows redundant records. 
Resolution:
 The Availability report for SLA Detail by the user now shows only unique records.
(10.2.0, DE161469, 00324914)
Symptom:
 Availability report shows 100% available for VSS switches (Mtype: 0x2100b2) though there are outages. 
Resolution:
 The Availability reports do now show the correct outages for VSS switches.
(10.2.0, DE161634, 00297494)
Symptom:
 The filter button drop-down does not work with Service Manager reports.  
Resolution:
 Filter button works appropriately in Service Manager reports.
(10.2.0, DE165775, 00356701) 
Symptom: 
Rescheduling existing reports through Instance Manager fails with exceptions. 
Resolution:
 Rescheduling existing reports through Instance Manager does not generate any exceptions.
(10.2.0, DE165777, 00361777)
Symptom:
 Parameter page does not load all the alarms for include exclude parameter in alarm reports. 
Resolution:
 The parameter page now lists all the alarms.
(10.2.0, DE177334, 00351288)
Symptom:
 Execution of poll_device.sh script failed with NoClassDefFoundError error in console. 
Resolution:
 Updated the class path to make poll_device.sh script run without errors.
(10.2.0, DE187081, 00449327)
Symptom:
 Users are not listed in "Alarm activity by user" report and cannot filter on the users. 
Resolution:
 Users are listed in the "Alarm activity by user" report and can filter the users.
(10.2.0, DE202459, 00410236) 
Symptom:
 Security bucket files in report manager are not processed after integration with Jasper Reports Server. 
Resolution:
 All the security bucket will be processed in report manager without error.
(10.2.0, DE203382, 00374467) 
Symptom:
 The users cannot run report in CABI 4.x. due to date parsing issues. 
Resolution:
 The users are now able to run the reports in CABI 4.x. without any date parsing issues.
(10.2.0, DE241650, 00355488) 
Symptom:
 Sub report for Top-N most common alarms report do not get open. 
Resolution:
 Sub report for Top-N most common alarms report now opens without any error.
(10.2.0, DE241651, 00523091) 
Symptom:
 Services are not listed in the parameter page for service health reports. 
Resolution:
 Services are now listed in parameter page for service health reports.
(10.2.0, DE242101, 00516871)
Symptom:
 When running Top - N common alarm Group report, the link for sub report does not open with the error “Error Message: Invalid Argument Type” for few Global Collections. 
Resolution:
 When running Top - N common alarm Group report, the link for sub report now opens without any error for all the Global Collections.
(10.2.0, DE33873, 00183972)
Fixes to ReST API
Symptom:
 ReST calls result in a hang for 20-30 minutes when using rest API subscribe for alarms that would involve more than 10000 alarm updates at a time. 
Resolution:
 ReST calls return the updates and do not hang even if the alarm updates are large.
(10.2.0, DE177215, 00438572)
Symptom:
 
Spectrum OneClick hangs with "java.lang.OutOfMemoryError: Compressed class space" due to large number of REST queries using filter criteria.
Resolution:
 
Resolved Java class-loader leak in Rest API due to JAXB dependency.
(10.2.0, DE134107, 00294276)
Symptom:
 Ping through RESTAPI call fails with Internal Error: Must add unpack for type java.lang.Integer. 
Resolution:
 Ping through RESTAPI call is success without any error.
(10.2.0, DE259057, 00584930) 
Fixes to Secure Domain Connector (SDC)
Symptom:
 Duplicate traps being sent from Secure Domain Connector, due to improper cleanup of prior SpectroSERVER connections. 
Resolution:
 Properly cleaned up stale SpectroSERVER connections, including dormant threads.
(10.2.0, DE161112, 00299015)
Symptom:
 Duplicate traps being sent from Secure Domain Connector, due to improper cleanup of prior SpectroSERVER connections. 
Resolution:
 Properly cleaned up stale SpectroSERVER connections, including dormant threads.
(10.2.0, DE176525, 00299015) 
Symptom:
 Secure Domain Connector failover not working properly. 
Resolution:
 Resolved Secure Domain Connector failover issues.
(10.2.0, DE224336, 00380740)
Fixes to Service Desk Integration
Symptom:
 The Probable cause of an alarm is not displayed in Service Desk ticket, when alarm title is empty. 
Resolution:
 The Probable cause of an alarm is displayed in Service Desk ticket, when alarm title is empty.
(10.2.0, DE244793, 00363845) 
Fixes to Service Manager
Symptom:
The Outage Column "Current MOT" in Service Manager is
confusing.
Resolution:
 Outage Table Column "Current MOT" has been renamed to "Peak Outage Time" in Service Manager to avoid ambiguity.
(10.2.0, DE200214, 00420431)
Symptom:
 SpectroSERVER crashes when they make any service changes like: a) creating new service and b) adding / removing resources to / from any service. 
Resolution:
 SpectroSERVER does not crash anymore when there is service changes like: a) creating new service and b) adding / removing resources to / from any service.
(10.2.0, DE160254, 00318035)
Symptom:
 SpectroSERVER may crash during deletion of a resource from Slm. 
Resolution:
 SpectroSERVER does not crash during deletion of a resource from Slm.
(10.2.0, DE250615, 00533903) 
Symptom:
 Random crash in SLM while updating the resource collectors when the policy used by the parent service or resource monitor has been changed. 
Resolution:
 Handled the scenarios in SLM that may result in this crash.
(10.2.0, DE45452, 00226907)
Symptom:
 During the deletion of a device model, if any of the attributes returns NULL, SpectroSERVER experiencing a crash. 
Resolution:
 During the deletion of a device model, SpectroSERVER will not crash even if any of the device attributes is NULL.
(10.2.0, DE154222, 00316364)
Fixes to SNMPv3
Symptom:
 Spectrum generates incorrect SNMPv3 duplicate engine ID alarm for the same IP address of a device when primary address is down. 
Resolution:
 Spectrum does not generate incorrect SNMPv3 duplicate engine ID alarm for the same IP address of a device when primary address is down.
(10.2.0, DE34260, 00180941)
Fixes to SpectroSERVER
Symptom:
 SpectroSERVER crash due to invalid attribute reference in RESTful API call. 
Resolution:
 SpectroSERVER properly handles invalid attribute references in RESTful API calls.
(10.2.0, DE130290, 00278277) 
Symptom:
 SpectroSERVER constantly crashes while processing NCM tasks. 
Resolution:
 SpectroSERVER does not crash while processing NCM tasks.
(10.2.0, DE142619, 00183082)
Symptom:
 Juniper devices continuously trigger a chassis manager reconfiguration leading to creation of duplicate modules thereby causing SS CPU
problems.
Resolution:
 Juniper devices are not triggering constant chassis manager reconfiguration and no duplicate modules are created.
(10.2.0, DE156843, 00342378)
Symptom:
 Spectrum generates CPU and Memory thresholds alarms only on one instance, even if other instances are violating the threshold. 
Resolution:
 Spectrum to monitor individual instances one has to add Spectrowatches for each instance.
(10.2.0, DE131386, 00281705)
Symptom:
 Intermittent SpectroSERVER performance problems. 
Resolution:
 Improved code performance in a few implicated areas, including NCM and Policy Manager.
(10.2.0, DE142937, 00321786)
Symptom:
 SpectroSERVER performance problems when doing case-sensitive text searching. 
Resolution:
 Improved SpectroSERVER performance when doing case-sensitive text searches.
(10.2.0, DE203429, 00329331)
Symptom:
 SpectroSERVER crash on start-up. 
Resolution:
 Improved stability when reading associations from the SpectroSERVER database.
(10.2.0, DE155001, 00339175)
Symptom:
 processd crash during socket-layer handshaking, most likely from non-Spectrum network traffic. 
Resolution:
 Added additional checks and error handling to avoid socket-layer handshake crash.
(10.2.0, DE156441, 00119883)
Symptom:
 SpectroSERVER crashes while discovering devices that are on the IP Exclusion list through Secure Domain Connector (SDC). 
Resolution:
 SpectroSERVER does not crash while discovering devices that are on the IP Exclusion list through Secure Domain Connector (SDC).
(10.2.0, DE160569, 00360988) 
Symptom:
 SpectroSERVER process crashes when launching SPECTRUM Performance View on a Linux computer. 
Resolution:
 SpectroSERVER process does not crash when launching SPECTRUM Performance View.
(10.2.0, DE165861, 00330341)
Symptom:
 Spectrum is unable to put some devices in maintenance mode when the device is added as a resource to multiple services 
Resolution:
 Spectrum is now able to put some devices in maintenance mode when the device is added as a resource to multiple services
(10.2.0, DE177367,00438572) 
Symptom:
 Rare SpectroSERVER crash during core read operation. 
Resolution:
 Resolved code fault.
(10.2.0, DE186554, 00361219) 
Symptom:
 SPECTRUM bandwidth calculations are incorrect for devices that are discovered using snmpv2 and interfaces containing 64-bit values. 
Resolution:
 SPECTRUM computes bandwidth calculations correctly for interfaces that do not contain 64-bit counter and discovered as SNMPv2.
(10.2.0, DE186777, 00300945) 
Symptom:
 SpectroSERVER consumes excessive memory when Cisco ASA firewall devices are discovered 
Resolution:
 Memory leaks are handled and SpectroSERVER consumes limited memory when Cisco ASA firewall devices are discovered
(10.2.0, DE195093, 00343135)
Symptom:
 Spectrum processd not starting any processes, even though there are valid install tickets.
Resolution:
 Spectrum now properly supporting 64-bit file systems even in rare scenario of nodes exceeding 32-bit values.
(10.2.0, DE203430, 00442210) 
Symptom:
 SpectroSERVER performance issues due to Online Backups scheduled simultaneously across a DSS. 
Resolution:
 Core SpectroSERVER watch unregistration now handled on a lower-priority thread to prevent performance problems.
(10.2.0, DE199178, 00457908)
Symptom:
 After modeling a SystemEDGE and MSCS AIM host, the SpectroSERVER crashes as it was unable to fetch the PMON_SEND_ALARMS_TO attribute. 
Resolution:
 SpectroSERVER will not crash after modeling a SystemEDGE and MSCS AIM host.
(10.2.0, DE201604, 00427870) 
Symptom:
 The users without privileges are able to see and change maintenance mode schedules. 
Resolution:
 The users without privileges are unable to see and change maintenance mode schedules.
(10.2.0, DE203874, 00262024)
Symptom:
 Spectrum does not respect the locked connections during fan-out creation. 
Resolution:
 Spectrum now respects the locked connections during fan-out creation.
(10.2.0, DE242634, 00462455) 
Symptom:
 SpectroSERVER memory growth over time. 
Resolution:
 Fixed several leaks in Cisco Firewall and Generic Host support.
(10.2.0, DE244111, 00473250)
Symptom:
 Traps received from IP addresses that are shared between devices, but from non-management addresses are asserted on all devices. 
Resolution:
 Introduced new device attribute UseRPAForTrapProcessing (0x13369) that enables use of the Redundancy Preferred Address (RPA) (0x12d84) list instead of the DeviceIPAddressList (0x12a53) for processing traps. This allows devices to be configured to excluded IPs from trap processing. IPs that are in the Redundancy Excluded Address (REA) (0x12d85) List, are not included in the RPA list and therefore do not participate in trap processing. This functionality is disabled by default, setting UseRPAForTrapProcessing=TRUE enables it. As part of this change, non-global (link-local, site-local, and so on) IPv6 attributes are also excluded from trap processing.
(10.2.0, DE176524, 00153003) 
Symptom:
 SpectroSERVER crash during Fault-Isolation handling. 
Resolution:
 Improvements to Fault-Isolation code to increase stability.
(10.2.0, DE34077, 00179689) 
Symptom:
 Events from secondary SpectroSERVER startup being inadvertently logged to DDM database. 
Resolution:
 Fixed code flaw causing secondary events to be incorrectly logged
(10.2.0, DE34120, 22046804)
Symptom:
When SpectroSERVER is in a time zone behind the OneClick client, scheduling mechanism does not work if the user tries to schedule something within the window of the time zone difference. 
Resolution:
 When SpectroSERVER and OneClick client are in different time zones, scheduling mechanism works if the user tries to schedule something within the window of the time zone difference. 
(10.2.0, DE135544, 00298022)
Fixes to UIM Integration
Symptom:
 A few VM models were found in the Lost and Found node after Spectrum UIM integration. 
Resolution:
 Implemented a default place holder for all the UIM entities hence they are not found in the Lost and Found node.
(10.2.0, DE139925, 00369761)
Symptom:
 During UIM Integration sync, there were lot of fluctuations in the number of responses which cause model deletions and creations in Spectrum.
Resolution:
 Enhanced UIM Integration debug logging to provide more details that are related to models getting deleted.
(10.2.0, DE144869, 00323900)
Fixes to VPN Manager 
Symptom:
 During Route Target based VPN discovery, VPN Sites are associated to VRFs based on VRF names in some cases. 
Resolution:
 During Route Target based VPN discovery, VPN Sites are associated to VRFs based on its Route Target configuration.
(10.2.0, DE139925)
Fixes to WebClient
Symptom:
 Unable to open Service Desk ticket hyperlink in WebClient  
Resolution:
 Corrected the Service Desk URL to be opened from WebClient on clicking the ServiceDesk Ticket ID.
(10.2.0, DE161539, 00345208)
Symptom:
 Wrong order sorting of WebClient Date/Time column data in IE 11.
Resolution:
 Changed the code to use epoch date for sorting and for displaying epoch date will be converted to client locale date/time.
(10.2.0, DE197907, 00414851) 
Symptom:
 Error when selecting Alarm Filter in WebClient, the user seeing "HTTP 500 - Internal Server Error occurred, please reload Webclient". 
Resolution:
 With this fix, the internal error is not displayed as code is written to handle both '&' and double quotes(").
(10.2.0, DE249529, 00453080)