Access Point (AP) Attributes

casp1032
The details in the
Access Point > Information Tab
is populated with relevant values, only when SNMP APs make the association with its WLC. (The values are actually exposed from the WLC MIBs)
By default, the information displayed in 
Access Point > Information Tab
 is not exposed by SNMP APs. 
This is because, Standalone/Autonomous 
Access Points
 (i.e APs not associated to any WLC), do not have this information in its MIBs, and this information is available only from associated WLCs.
To view the details / values in the
Access Point > Information Tab
:
  • Model the parent
    Wireless Controller
    device, by enabling Access Point Discovery, using the
    Create Wireless Access Points
    option.
     
For the
Access Point Information
sub view to populate, a minimum of one polling cycle is required.
Cisco Access Point Information
The following attributes are displayed when you navigate to
Access Point >  Information Tab
>
Access Point Information
sub view for an identified and modeled AP, under the
WLC Manager
nodes.
Cisco AP Information.png
Access Point Information sub view displays the following information:
  • Ethernet MAC
  • Base Radio MAC 
  • AP Type
  • Admin Status
  • Monitor Only Mode
  • Certificate Type
  • Operation Status
  • AP Model
  • Location
  • Group Vlan Name
  • Primary Controller Name
  • Secondary Controller Name
  • Tertiary Controller Name
  • Software Version
  • Boot Version
  • IOS Version
  • Serial Number
  • No of connected Users
  • Data Sent
  • Data Received
Aruba Access Point Information
The following attributes are displayed when you navigate to 
Access Point >  Information Tab
 >
Aruba Access Point Information 
sub view for an identified and modeled AP, under the 
WLC Manager
 >
Aruba
nodes.
Aruba AP Information.png
The Aruba Access Point Information sub view displays the following information:
  • MAC Address
  • IP Address
  • Name
  • Group Name
  • Up Time
  • AP Type
  • IP Sec Mode
  • Location
  • AP Model
  • Operation Status
  • Active Controller IP Address
  • Standby Controller IP Address
  • Access Point Connected as
  • Software Version
  • Serial Number
  • No of Connected Clients
  • Data Sent
  • Data Received