Issues Resolved

The following is a list of defects and fixes that have been included in the 10.3.2 release: 
casp1032
 
The following is a list of defects and fixes that have been included in the 10.3.2 release: 
 
 
 
2
 
2
 
 
Fixes to Integration
 
Symptom
: CA PC events do not sync to Spectrum due to ArrayIndexOutOfBoundsExceptions in Spectrum Tomcat logs.
 
Resolution
: CA PC events are synced to Spectrum and no Exceptions are reported in Spectrum Tomcat logs.
(DE392707, 01216539, 10.3.2)
 
Symptom
: There are performance issues like high memory utilization with VNA integration. 
 
Resolution
: Changes for VNA 3.6.4 integration are incorporated which would resolve performance problems.
(DE401773, 01279989, 10.3.2)
 
Symptom: 
CA PM events do not sync to Spectrum and Tomcat logs shows ArrayIndexOutOfBoundsException.
 
Resolution: 
CA PM events are synced to Spectrum and Tomcat logs does not report ArrayIndexOutOfBoundsException.
(DE406041, 01293282, 10.3.2)
 
Symptom
: After the OLB on a landscape, at next sync cycle Spectrum is doing a FULL sync for that Landscape.
 
Resolution
: After the OLB on a Landscape, at next sync cycle Spectrum continues with INCREMENTAL Sync for that landscape.
(DE402855, 01284931, 10.3.2)
 
Symptom
:Spectrum 10.3.0.0.341 overlapped with the IP addresses for Hypervisors in the VNA Aggregator Plugin were being incorrectly reconciled even though they were in different VNA User Domains.
 
Resolution
: The fix for this issue is when Esx Hosts is being created, consider its IP address and SDC name as parameters with the CREATE_MODEL_BY_IP action.
(DE402427, 10.3.2)
Fixes to NCM
 
Symptom
: The moving device from out of box families is not allowed in Spectrum.
 
Resolution
: Spectrum allows moving the devices from out of box NCM families to the custom family.
(DE404414, 01293804, 10.3.2)
 
Symptom: 
NCM configuration buckets are not being processed because config_text_id value is null.
 
Resolution: 
NCM configuration buckets are being processed after Tomcat restarts.
(DE391912, 01190980, 10.3.2)
Symptom:
 Cisco 9300 series devices are not placed in the ios-ssh family, even though the ssh is supported and k9 is enabled by default.
Resolution:
 Add 
cisco_ssh_check=9K
 in the 
<SPECROOT>/SS/.vnrmc
 file and restart the SpectroSERVER, to place the Cisco 9300 series devices in the correct device family.
(DE385140, 01186025, 10.3.2)
Fixes to OneClick
 
Symptom
: OneClick servers take long (about 30 minutes) to start up.
 
Resolution
: Potential fix is provided to improve the Tomcat startup time for the users and user group watch registration process.
(DE337448, 00899192, 10.3.2)
 
Symptom
: Interface condition is not updated regularly based on the module status.
 
Resolution
:  Interface condition is changed as per the module status.
(DE398746, 01263209, 10.3.2)
 
Symptom
: Chassis modules do not get created in case of an empty entAliasMappingIdentifier data.
 
Resolution
: To fix this issue, a new .vnmrc flag/option ForceChassisModuleModel is introduced, that enables users to create chassis modules in case of entAliasMappingIdentifier OID data which is not available in device. This functionality is disabled by default, setting ForceChassisModuleModel=TRUE in ".vnmrc" file, enables it. 
(DE399364, 01143801, 01207176, 10.3.2)
 
Symptom
: The ieee8023adLag models (port channels) do not have LACP_HasPart associations that are created with corresponding physical interfaces.
 
Resolution
: With this fix, ieee8023adLag models (port channels) have LACP_HasPart associations that are created with corresponding physical interfaces.
(DE396211, 01249004, 10.3.2)
 
Symptom
: Request to add additional attributes for WA_Link and Provider_Cloud models in Spectrum to create a custom OneClick view. 
 
Resolution
: The following attributes are added to WA_Link and Provider_Cloud model in Spectrum. Provider Name, Provider Telephone Number, Provider Email, Postal Code, Location, Address, Agreement Contract Number, SLA, Tech Class, Reserve. 
(DE391423, 01223112,10.3.2)
 
Symptom
: An option to convert SPM read/write test to read-only, under OC test details view was requested.
 
Resolution
: An option to convert SPM read/write test to read-only, under OC test details view, is provided, so that the tests are not deleted on the device.
(DE391086, 01220075, 10.3.2)
Fixes to Events and Alarms
 
Symptom: 
An event is generated if the Event 0x22fffed occurs 3 times in 420 second (by default), but some Events 0x22fffeb occur after only one 0x22fffed. This happens on a server with 12000 devices (huge Landscape) and if there is a backup test done. Event Counter Rules do not always work as expected.
 
Resolution: 
Adding a new XML tag addresses the issue.
(DE399364, 01259544, 10.3.2)
 
Symptom
: Last Successful Poll (0x0011620) attribute is updated when device is down.
 
Resolution
: Last Successful poll time update only occurs if device is up.
(DE393578, 01274203, 01234274,10.3.2)
 
Symptom
: Alarm condition and landscape names do not appear correctly, under the Alarm Details Report. 
 
Resolution
: This issue has been fixed and the alarm condition and landscape names appear correctly under the Alarm Details Report.
DE392165, 01230769, 10.3.2)
Fixes to SpectroSERVER
Symptom
: SpectroSERVER crashes when parsing the regular expression.
Resolution
: This issue has been fixed and SpectroSERVER does not crash when parsing the regular expression.
(DE401365, 01276772, 10.3.2)
Symptom
: Empty Trunking port type models cause vLan port list to grow high, causing OLB and SS failure.
Resolution
: Now vLan port list does not grow and will not lead to OLB and SS failures.
(DE403508, 01287188, 10.3.2)
Symptom: 
SpectroSERVER (SS) crashes while activating FI model. 
Resolution: 
This issue has been fixed, and SS does not crash while activating FI model. 
(DE401957, 01279597, 10.3.2)
 
Symptom
: Empty Trunking port type models cause vLan port list to grow high, causing OLB and SS failure.  
 
Resolution
: Now vLan port list does not grow and does not lead to OLB and SS failures.
(DE391733, 01228068, 10.3.2)
 
Symptom: 
SS crashes due to memory growth.
 
Resolution: 
Memory issues for SNMPv3 are now fixed.
(DE383903, 01181959, 10.3.2)
 
Symptom
: SpectroSERVER may run into a performance issue when it retrieves huge number of alarms with alarm filters.
 
Resolution
: SpectroSERVER never runs into performance issue when it retrieves huge number of alarms with alarm filters.
(DE326198, 00875166, 10.3.2)
Fixes to JasperServer Reports / CABI
 
Symptom
: There is an extra newline character at the end of the Report Subtitle title when exported to CSV, making the Report Period unavailable to the user. 
 
Resolution
: The newline character at the end of Report subtitle is removed to fix this issue. 
(DE401205, 01274966, 10.3.2)
 
Symptom
: Jasper Asset Report shows incorrect or negative values for "Idle Days".
 
Resolution
: This issue has been fixed and the Jasper Asset Report shows correct values for "Idle Days".
(DE404574, 01257216, 10.3.2)
 
Symptom
: The disk space does not get released for the old event table partitions on the SRM server.
 
Resolution
: This issue is fixed in this release and the disk space is released for the old event table partitions on the SRM server.
(DE404003, 01260382, 01324152, 10.3.2)
 
Symptom
: Jasper Spectrum Overview Dashboard does not populate the data when LDAP is enabled on the OneClick server.
 
Resolution
: This issue has been fixed, and Jasper Spectrum Overview Dashboard populates the data when LDAP is enabled on the OneClick server.
(DE399262, 01268705, 10.3.2)
Other Fixes
 
Symptom
: Moving device from out of box families operation fails in Spectrum. 
 
Resolution
: Moving the devices from out of box NCM families to the custom family is now successful.
(DE404414, 01293804, 10.3.2)
 
Symptom
: Primary MLS high memory growth occurs when trap director is enabled. 
 
Resolution
: Memory leak will not occur during trap process when trap director is enabled. 
(DE403882, 01269934, 10.3.2)
 
Symptom
: Jars that are signed with expired certificate do not run post the certificate expiry date.
 
Resolution
:  All jars are signed with a new certificate and they run typically as expected.
(DE403331, DE403330, DE403329, 10.3.2)
 
Symptom
: Max collision exceeds error as seen in the vnm.out file.
 
Resolution
: This issue has been fixed and the max collision error does not occur.
(DE404213, 01291700, 10.3.2)
 
Symptom
: TopN Event group report shows wrong event count and subreport show the correct number of events.
 
Resolution
: With this fix, the TopN event group reports show correct event count as the subreport event count.
(DE397289, 01254834, 10.3.2)
 
Symptom
: Global Collection adds or removes username shows 'Spectrum' instead of the User who added or removed. 
 
Resolution
: This issue has been fixed and now the username under Global Collection for additions/removal shows correctly. 
(DE387404, 01205072, 10.3.2)
 
Symptom
: NRM_RunningFirmware attribute mapping returns failure for octet string type
 
Resolution
: NRM_RunningFirmware attribute mapping/parsing mechanism is corrected to parse the octet string type. 
(DE389349, 01206333, 10.3.2)
 
Symptom
: Input control panel takes a long time to load, because the security string joins in query. 
 
Resolution
: Security string is removed so that the Input Control Panel parameter queries load faster. 
(DE397959, 01247211, 10.3.2)
 
Symptom: 
Last Successful Poll (0x0011620) attribute does not update when device is modeled using SNMP.
 
Resolution: 
The fix is updates the 'Last Successful Poll' attribute if any one of above external attribute read is success.
(DE397970, 01262441, 10.3.2)
 
Symptom
: CA Spectrum modeling information is not available for VNM model and Pingables on 10.3.
 
Resolution
: This issue has been fixed and the CA Spectrum modeling information is now available for VNM model and Pingables on 10.3.
(DE395404, 01249647, 10.3.2)
 
Symptom
: There is a memory leak during the VPN discovery.
 
Resolution
: This issue has been fixed and the memory leak does not happen during VPN discovery.
(DE395131, 01246573, 10.3.2)
 
Symptom
: Service Manager shows the incorrect state change after installing 10.3.0 BMP01.
 
Resolution
: The Service Manager shows the correct state change after the fix. 
(DE395497, 01249415, 10.3.2)
 
Symptoms: 
IP SLA statistics results for ICMP_JITTER test were calculated wrongly.
 
Resolution: 
IP SLA statistics are shown properly for ICMP_Jitter test.
(DE386937, 01195526, 10.3.2)
 
Symptom
: Authentication request goes to the LDAP server for local Spectrum users instead of authenticating with Spectrum.
 
Resolution
: Spectrum local user is authenticated first with Spectrum instead of sending request to LDAP server.
(DE396290, 01230069, 10.3.2)
 
Symptom: 
Multiple data centers are not being migrated at same time.
 
Resolution
: Multiple data centers are migrated for Spectrum UIM integration via RESTful web services.
(DE394306, 01248192, 10.3.2)
 
Symptom
: MOT values are incorrect in the Service Manager reports.
 
Resolution
: MOT values are displayed and calculated properly.
(DE381967, 01173907, 10.3.2)
 
Symptom
: Link Information is not displayed correctly in some specific cases, and Tomcat has to be restarted to show the link information properly. 
 
Resolution
: Link Information will now be displayed properly without restarting Tomcat.
(DE407053, 01308163, 10.3.2)
 
Symptom
: Intermittent connections are not drawn during discover connections, this is because there is no order of Connect_to association being created if the connection is made between device with ports (D1) and a device without ports (D2) that is, Port1 of device D1 is connected to D2.
 
Resolution
:  The order of creating Connect_to association had been fixed. For example: Port1 to D2 and D1 to D2
(DE388020, 01207304, 10.3.2)
 
Symptom
: In Spectrum MIB tools, 'Export Trap Support' throws error and the files are exported incompletely.
 
Resolution
: Required null checks are added to fix the error & now "Export Trap Support" files are exported completely.
(DE405082, 01297266, 10.3.2)
 
Symptom
: Invalid characters are shown for Aruba WLC-related events which have Mac Address.
 
Resolution
: Fixed by replacing Mac Address type formatter from S to X for userPhyAddress and wlsxTrapUserPhyAddress
(DE408436, 10.3.2)