Access Point (AP) Attributes

casp1032
 
 
The details in the 
Access Point > Information Tab
 is populated with relevant values, only when SNMP APs make the association with its WLC. (The values are actually exposed from the WLC MIBs)
 By default, the information displayed in 
Access Point > Information Tab
 is not exposed by SNMP APs.
This is because, Standalone/Autonomous 
Access Points
 (i.e APs not associated to any WLC), do not have this information in its MIBs, and this information is available only from associated WLCs.
 
To view the details / values in the 
Access Point > Information Tab
:
 
  • Model the parent 
    Wireless Controller
     device, by enabling Access Point Discovery, using the 
    Create Wireless Access Points
     option.
     
 For the 
Access Point Information
 sub view to populate, a minimum of one polling cycle is required.
Cisco Access Point Information
The following attributes are displayed when you navigate to 
Access Point >  Information Tab
 > 
Access Point Information 
sub view for an identified and modeled AP, under the 
WLC Manager
 nodes.
 
Cisco AP Information.png
 
 
Access Point Information sub view displays the following information:
 
  • Ethernet MAC
  • Base Radio MAC 
  • AP Type
  • Admin Status
  • Monitor Only Mode
  • Certificate Type
  • Operation Status
  • AP Model
  • Location
  • Group Vlan Name
  • Primary Controller Name
  • Secondary Controller Name
  • Tertiary Controller Name
  • Software Version
  • Boot Version
  • IOS Version
  • Serial Number
  • No of connected Users
  • Data Sent
  • Data Received
Aruba Access Point Information
The following attributes are displayed when you navigate to 
Access Point >  Information Tab
 > 
Aruba Access Point Information 
sub view for an identified and modeled AP, under the 
WLC Manager
 > 
Aruba
 nodes.
 
Aruba AP Information.png
 
 
The Aruba Access Point Information sub view displays the following information:
 
  • MAC Address
  • IP Address
  • Name
  • Group Name
  • Up Time
  • AP Type
  • IP Sec Mode
  • Location
  • AP Model
  • Operation Status
  • Active Controller IP Address
  • Standby Controller IP Address
  • Access Point Connected as
  • Software Version
  • Serial Number
  • No of Connected Clients
  • Data Sent
  • Data Received