Connect a Passive Robot to a Hub

After you install a passive robot, you must add the robot to a hub's registered robots. This makes the robot a child of the specified parent hub and enables the robot to communicate on the message bus.
uim901
After you install a passive robot, you must add the robot to a hub's registered robots. This makes the robot a child of the specified parent hub and enables the robot to communicate on the message bus.
Follow these steps:
  1. In Infrastructure Manager, navigate to the hub that will be the parent of the passive robot.
  2. Display the hub's probes, then right-click the hub probe and select 
    Configure
    .
  3. Select the 
    Robots
     tab.
  4. In the
    Registered Robots
    pane, right-click and select 
    Add Passive Robot
    .
  5. Enter the robot’s IP address and first probe port (default is 48000).
  6. Click 
    Verify
    , then click 
    OK
     to exit the dialogs.
The parent hub is now configured to request messages from the robot.
If you plan to deploy marketplace packages to the robot, make sure you specify the marketplace user.