Network Unified Dashboard

The Network Unified Dashboard provides predefined list views with information about your network performance.
uim901
network_UD
The Network Unified Dashboard provides predefined list views with information about your network performance.
Contents
If your Unified Dashboard is not populating with data, make sure all required data sources for the Unified Dashboard are enabled. The required probe must be deployed and must be configured so that required QoS metrics and subkeys or targets are activated. For more information, see the help topic on required data sources for the Unified Dashboard.
Network Required Data Sources
The table contains the probes and QoS metrics required for the preconfigured Network dashboard.
Probe
QoS Required
interface_traffic
net_connect
url_response
cisco_monitor
QOS_INTERFACE_TRAFFIC_PERC
QOS_NET_CONNECT
QOS_URL_RESPONSE
QOS_MEMORY_USAGE
QOS_CPU_USAGE
Web Site Response Time
Column
Description
Monitored From
Name of the host with the url_response probe that is monitoring web site response time.
Profile Name
Name of the profile configured in the url_response probes. Typically this is the name of the web site.
Resp Time
Average time, in milliseconds, to receive a response to an HTTP GET request during the last hour.
Resp Time
Graph of average time, in milliseconds, to receive a response to an HTTP GET request during the last hour.
Alarm
Alarms generated by the url_response probe, if any.
Cisco Device Health
Column
Description
Host
IP address of the Cisco device.
Memory Used
Last reported number of megabytes of memory consumed by the Cisco device.
Memory Free
Last reported number of megabytes of memory available.
CPU Usage
Last reported percent of CPU consumed by the Cisco device.
Ping Response Time
Column
Description
Monitored From Host
Name of the host with the net_connect probe that is monitoring ping response time.
Host:Port
Name of the host and port number that the ping request was sent to.
Response Time
Last reported time, in milliseconds, to receive a response to the ping request.
Interface Bandwidth
Column
Description
Device
Name of the device where the interface is located.
Origin
QoS data from probes is tagged with a name to identify the origin of the data. The origin name is set in the controller probe GUI. If the origin name is not set, the hub name is used.
Interface
Type of interface.
Bandwidth
Last reported percent of bandwidth consumed by traffic on the interface.