NETAPP ONTAP Unified Dashboard
Contents
uim851
netapp_ontap_UD
Contents
: If your Unified Dashboard is not populating with data, make sure all required data sources for the Unified Dashboard are enabled. The required probe must be deployed and must be configured so that required QoS metrics and subkeys or targets are activated. For more information, see the help topic on required data sources for the Unified Dashboard.
NETAPP ONTAP Required Data Sources
This table lists the probes, QoS metrics, and subkeys or targets that must be activated to populate data in the NETAPP ONTAP dashboard. An asterisk (*) means that this QoS brings data for all targets for which it is applicable.
QoS | Subkey/Target |
|---|---|
QOS_STORAGE_CPU_UTILIZATION | * |
QOS_STORAGE_TOTAL_IOPS | * |
QOS_STORAGE_TOTAL_AVERAGE_LATENCY | * |
QOS_STORAGE_TOTAL_CAPACITY_AGGR | * |
QOS_STORAGE_USED_CAPACITY_AGGR | * |
QOS_STORAGE_FREE_CAPACITY_AGGR | * |
QOS_STORAGE_PERCENT_CAPACITY_USED_AGGR | * |
QOS_STORAGE_PERCENT_CAPACITY_FREE_AGGR | * |
QOS_STORAGE_TOTAL_SNAPSHOT_CAPACITY_AGGR | * |
QOS_STORAGE_SNAPSHOT_USED_CAPACITY_AGGR | * |
QOS_STORAGE_SNAPSHOT_FREE_CAPACITY_AGGR | * |
QOS_STORAGE_PERCENT_SNAPSHOT_USED_AGGR | * |
QOS_STORAGE_PERCENT_SNAPSHOT_FREE_AGGR | * |
QOS_STORAGE_ENV_OVER_TEMPERATURE_STATUS | * |
QOS_STORAGE_FAILED_FAN | * |
QOS_STORAGE_FAILED_POWER_SUPPLY_COUNT | * |
QOS_STORAGE_NVRAM_BATTERY_STATUS | * |
QOS_STORAGE_TOTAL_DISK_COUNT | * |
QOS_STORAGE_NUMBER_OF_FAILED_DISKS | * |
QOS_STORAGE_NUM_OF_HOT_SPARES | * |
QOS_STORAGE_TOTAL_RAW_CAPACITY | * |
QOS_STORAGE_OPERATIONAL_STATUS_INTERFACE | * |
QOS_STORAGE_LUN_IOPS | * |
QOS_STORAGE_LUN_OTHER_IOPS | * |
QOS_STORAGE_LUN_READ_IOPS | * |
QOS_STORAGE_LUN_WRITE_IOPS | * |
QOS_STORAGE_LUN_AVG_LATENCY | * |
QOS_STORAGE_LUN_AVG_OTHER_LATENCY | * |
QOS_STORAGE_LUN_AVG_READ_LATENCY | * |
QOS_STORAGE_LUN_AVG_WRITE_LATENCY | * |
QOS_STORAGE_LUN_ERROR_COUNT | * |
QOS_STORAGE_LUN_ONLINE | * |
QOS_STORAGE_LUN_PERCENT_USED | * |
QOS_STORAGE_LUN_READ_BYTES | * |
QOS_STORAGE_LUN_TOTAL_SIZE | * |
QOS_STORAGE_LUN_SIZE_USED | * |
QOS_STORAGE_LUN_WRITE_BYTES | * |
QOS_STORAGE_STATUS_QTREE | * |
QOS_STORAGE_DISK_UTILIZATION | * |
QOS_STORAGE_VSERVER_STATE | * |
QOS_STORAGE_VOLUME_STATUS | * |
QOS_STORAGE_TOTAL_CAPACITY_VOL | * |
QOS_STORAGE_USED_CAPACITY_VOL | * |
QOS_STORAGE_FREE_CAPACITY_VOL | * |
QOS_STORAGE_PERCENT_CAPACITY_USED_VOL | * |
QOS_STORAGE_TOTAL_SNAPSHOT_CAPACITY_VOL | * |
QOS_STORAGE_SNAPSHOT_USED_CAPACITY_VOL | * |
QOS_STORAGE_SNAPSHOT_FREE_CAPACITY_VOL | * |
QOS_STORAGE_PERCENT_SNAPSHOT_USED_VOL | * |
For more information about configuring probes, see the documentation for each probe at the CA Unified Infrastructure Management Probes Library.
System Statistics Summary
This table displays information about all system statistics that are being monitored.
Column Name | Description |
|---|---|
CPU Utilization | The percent of time that the CPU has been doing useful work since the last time a client requested the CPU Busy Time Percent. |
Total IOPS | The total operations per second. |
Total Average Latency | The average latency for all operations in the system in milliseconds. |
Aggregate Summary
This table displays information about the aggregates on the NetApp Storage system.
Column Name | Description |
|---|---|
Total Capacity | The total capacity for the referenced file system. |
Used Capacity | The used capacity for the referenced file system. |
Free Capacity | The free capacity for the referenced file system. |
Used Capacity Percent | The used capacity inpercentage for the referenced file system. |
Free Capacity Percent | The free capacity inpercentage for the referenced file system. |
Snapshot Total Capacity | The total capacity for the snapshot on the referenced file system. |
Snapshot Used Capacity | The used capacity for the snapshot on the referenced file system. |
Snapshot Free Capacity | The free capacity for the snapshot on the referenced file system. |
Snapshot Percent Used Capacity | The total used disk space for the snapshot in percentage on the referenced file system. |
Snapshot Percent Free Capacity | The total free disk spacefor the snapshot in percentage on the referenced file system. |
Controller Summary
This table displays information about the controllers on the NetApp Storage system.
Column Name | Description | |
|---|---|---|
Over Temperature Status | The current state of the hardware whether it is currently operating outside of its recommended temperature range. The possible values are [0 (within recommended temperature range) and 1(outside recommended temperature range)]. | |
Fans Outside RPM Count | The number of chassis fans that are not operating within the recommended RPM range. | |
Failed Power Supply count | The number of power supplies that are in degraded mode. | |
NVRAM Battery Status | The current status of the NVRAM battery or batteries.The possible values are [0 (battery_ok), 1 (battery_partially_discharged), 2 (battery_fully_discharged) and 3 (battery_not_present), 4(battery_near_end_of_life), 5 (battery_at_end_of_life), 6 (battery_unknown), 7 (battery_over_charged), and, 8 (battery_fully_charged)]. | 1.0 |
Disk Summary
This table displays information about the disks on the NetApp Storage system.
Column Name | Description |
|---|---|
Total Disk Count | The total number of disks on the system. |
Failed Disk Count | The number of disks that are currently broken. |
Spare Disk Count | The number of available spare disks. |
Total Raw Capacity | The total raw capacity of the system. |
Ethernet Interface Summary
This table displays information about the status of the Ethernet Interfaces on the NetApp Storage system.
Column Name | Description |
|---|---|
Operational Status | The status of the interface.The possible values are [0 (Up) and 1 (Down)]. |
LUN IOPS and Latency Summary
This table displays information about LUN IOPS and Latency on the NetApp Storage system.
Column Name | Description |
|---|---|
LUN IOPS | The total number of Target side SCSI operations for this LUN since the statistics were last reset. |
LUN Other IOPS | The total number of Target side SCSI operations that are not read or write for this LUN since the statistics were last reset. |
LUN Read IOPS | The total number of Target side SCSI read operations for this LUN since the statistics were last reset. |
LUN Write IOPS | The total number of Target side SCSI write operations for this LUN since the statistics were last reset. |
LUN Average Latency | The average latency for all operations in the system in milliseconds. |
LUN Average Other Latency | The average latency for all other operations in the system in milliseconds. |
LUN Average Read Latency | The average latency for all read operations in the system in milliseconds. |
LUN Average Write Latency | The average latency for all write operations in the system in milliseconds. |
LUN Summary
This table displays information about LUN performance on the NetApp Storage system.
Column Name | Description |
|---|---|
LUN Error Count | The total number of errors seen on this LUN since the statistics were last reset. |
LUN Online | Whether the LUN is online. The possible values are [0 (Online), 1 (Offline)]. |
LUN Percent Used | The percent utilization for the LUN. |
LUN Read Bytes | The total number of bytes read from this LUN since the statistics were last reset. |
LUN Size | The total size of the LUN. |
LUN Size Used | The size used in GB that is in use on the LUN. |
LUN Write Bytes | The total number of bytes written to this LUN since the statisticswere last reset. |
Qtree Summary
This table displays information about Qtree performance on the NetApp Storage system.
Column Name | Description |
|---|---|
Qtree Status | The status of the qtree. The possible values are [0 (Normal) and 1 (Readonly)] |
Used Disk Performance Summary
This table displays information about used disk performance on the NetApp Storage system.
Column Name | Description |
|---|---|
Disk Utilization | The disk utilization percentage on the referenced disk drive. |
vServer Summary
This table displays information about vServer performance on the NetApp Storage system.
Column Name | Description |
|---|---|
vServer Status | The status of the vServer. The possible values are [0 (Running), 1 (Stopped), 2 (Starting), 3 (Stopping), 4 (Initializing), and 5(Deleting)]. |
Volume Summary
This table displays information about Virtual Volumes performance on the NetApp Storage system.
Column Name | Description |
|---|---|
Volume Status | The status of the volume. The possible values are [0 (Online), 1 (Offline), 2 (Restricted) and 3 (mixed)]. |
Total Capacity | The total capacity of the volume. |
Used Capacity | The used capacity of the volume. |
Free Capacity | The total capacity that is free for use on the volume. |
Percent Capacity Used | The total used capacity in percentage on the volume. |
Total Snapshot Capacity | The total capacity for the snapshot in the volume. |
Snapshot Used Capacity | The used capacity for the snapshot in the volume. |
Snapshot Free Capacity | The free capacity available in the volume and the snapshot reserve. |
Percent Snapshot Used | The used capacity in percentage for the snapshot in the volume. |