NETAPP ONTAP Unified Dashboard

The netapp_ontap Unified Dashboard provides predefined list views to monitor the health and performance of storage objects such as disks, volumes, and aggregates and storage systems running Data ONTAP 8.3x version in Cluster mode.
uim901
netapp_ontap_UD
The netapp_ontap Unified Dashboard provides predefined list views to monitor the health and performance of storage objects such as disks, volumes, and aggregates and storage systems running Data ONTAP 8.3x version in Cluster mode.
 
Contents
 
 
 
: If your Unified Dashboard is not populating with data, make sure all required data sources for the Unified Dashboard are enabled. The required probe must be deployed and must be configured so that required QoS metrics and subkeys or targets are activated. For more information, see the help topic on required data sources for the Unified Dashboard.
NETAPP ONTAP Required Data Sources
This table lists the probes, QoS metrics, and subkeys or targets that must be activated to populate data in the NETAPP ONTAP dashboard. An asterisk (*) means that this QoS brings data for all targets for which it is applicable.
QoS
Subkey/Target
QOS_STORAGE_CPU_UTILIZATION
*
QOS_STORAGE_TOTAL_IOPS
*
QOS_STORAGE_TOTAL_AVERAGE_LATENCY
*
QOS_STORAGE_TOTAL_CAPACITY_AGGR
*
QOS_STORAGE_USED_CAPACITY_AGGR
*
QOS_STORAGE_FREE_CAPACITY_AGGR
*
QOS_STORAGE_PERCENT_CAPACITY_USED_AGGR
*
QOS_STORAGE_PERCENT_CAPACITY_FREE_AGGR
*
QOS_STORAGE_TOTAL_SNAPSHOT_CAPACITY_AGGR
*
QOS_STORAGE_SNAPSHOT_USED_CAPACITY_AGGR
*
QOS_STORAGE_SNAPSHOT_FREE_CAPACITY_AGGR
*
QOS_STORAGE_PERCENT_SNAPSHOT_USED_AGGR
*
QOS_STORAGE_PERCENT_SNAPSHOT_FREE_AGGR
*
QOS_STORAGE_ENV_OVER_TEMPERATURE_STATUS
*
QOS_STORAGE_FAILED_FAN
*
QOS_STORAGE_FAILED_POWER_SUPPLY_COUNT
*
QOS_STORAGE_NVRAM_BATTERY_STATUS
*
QOS_STORAGE_TOTAL_DISK_COUNT
*
QOS_STORAGE_NUMBER_OF_FAILED_DISKS
*
QOS_STORAGE_NUM_OF_HOT_SPARES
*
QOS_STORAGE_TOTAL_RAW_CAPACITY
*
QOS_STORAGE_OPERATIONAL_STATUS_INTERFACE
*
QOS_STORAGE_LUN_IOPS
*
QOS_STORAGE_LUN_OTHER_IOPS
*
QOS_STORAGE_LUN_READ_IOPS
*
QOS_STORAGE_LUN_WRITE_IOPS
*
QOS_STORAGE_LUN_AVG_LATENCY
*
QOS_STORAGE_LUN_AVG_OTHER_LATENCY
*
QOS_STORAGE_LUN_AVG_READ_LATENCY
*
QOS_STORAGE_LUN_AVG_WRITE_LATENCY
*
QOS_STORAGE_LUN_ERROR_COUNT
*
QOS_STORAGE_LUN_ONLINE
*
QOS_STORAGE_LUN_PERCENT_USED
*
QOS_STORAGE_LUN_READ_BYTES
*
QOS_STORAGE_LUN_TOTAL_SIZE
*
QOS_STORAGE_LUN_SIZE_USED
*
QOS_STORAGE_LUN_WRITE_BYTES
*
QOS_STORAGE_STATUS_QTREE
*
QOS_STORAGE_DISK_UTILIZATION
*
QOS_STORAGE_VSERVER_STATE
*
QOS_STORAGE_VOLUME_STATUS
*
QOS_STORAGE_TOTAL_CAPACITY_VOL
*
QOS_STORAGE_USED_CAPACITY_VOL
*
QOS_STORAGE_FREE_CAPACITY_VOL
*
QOS_STORAGE_PERCENT_CAPACITY_USED_VOL
*
QOS_STORAGE_TOTAL_SNAPSHOT_CAPACITY_VOL
*
QOS_STORAGE_SNAPSHOT_USED_CAPACITY_VOL
*
QOS_STORAGE_SNAPSHOT_FREE_CAPACITY_VOL
*
QOS_STORAGE_PERCENT_SNAPSHOT_USED_VOL
*
For more information about configuring probes, see the documentation for each probe.
System Statistics Summary
This table displays information about all system statistics that are being monitored.
Column Name
Description
CPU Utilization
The percent of time that the CPU has been doing useful work since the last time a client requested the CPU Busy Time Percent.
Total IOPS
The total operations per second.
Total Average Latency
The average latency for all operations in the system in milliseconds.
Aggregate Summary
This table displays information about the aggregates on the NetApp Storage system.
Column Name
Description
Total Capacity
The total capacity for the referenced file system.
Used Capacity
The used capacity for the referenced file system.
Free Capacity
The free capacity for the referenced file system.
Used Capacity Percent
The used capacity inpercentage for the referenced file system.
Free Capacity Percent
The free capacity inpercentage for the referenced file system.
Snapshot Total Capacity
The total capacity for the snapshot on the referenced file system.
Snapshot Used Capacity
The used capacity for the snapshot on the referenced file system.
Snapshot Free Capacity
The free capacity for the snapshot on the referenced file system.
Snapshot Percent Used Capacity
The total used disk space for the snapshot in percentage on the referenced file system.
Snapshot Percent Free Capacity
The total free disk spacefor the snapshot in percentage on the referenced file system.
Controller Summary
This table displays information about the controllers on the NetApp Storage system.
Column Name
Description
Over Temperature Status
The current state of the hardware whether it is currently operating outside of its recommended temperature range. The possible values are [0 (within recommended temperature range) and 1(outside recommended temperature range)].
 
Fans Outside RPM Count
The number of chassis fans that are not operating within the recommended RPM range.
 
Failed Power Supply count
The number of power supplies that are in degraded mode.
 
NVRAM Battery Status
The current status of the NVRAM battery or batteries.The possible values are [0 (battery_ok), 1 (battery_partially_discharged), 2 (battery_fully_discharged) and 3 (battery_not_present), 4(battery_near_end_of_life), 5 (battery_at_end_of_life), 6 (battery_unknown), 7 (battery_over_charged), and, 8 (battery_fully_charged)].
1.0
Disk Summary
This table displays information about the disks on the NetApp Storage system.
Column Name
Description
Total Disk Count
The total number of disks on the system.
Failed Disk Count
The number of disks that are currently broken.
Spare Disk Count
The number of available spare disks.
Total Raw Capacity
The total raw capacity of the system.
Ethernet Interface Summary
This table displays information about the status of the Ethernet Interfaces on the NetApp Storage system.
Column Name
Description
Operational Status
The status of the interface.The possible values are [0 (Up) and 1 (Down)].
LUN IOPS and Latency Summary
This table displays information about LUN IOPS and Latency on the NetApp Storage system. 
Column Name
Description
LUN IOPS
The total number of Target side SCSI operations for this LUN since the statistics were last reset. 
LUN Other IOPS
The total number of Target side SCSI operations that are not read or write for this LUN since the statistics were last reset.
LUN Read IOPS
The total number of Target side SCSI read operations for this LUN since the statistics were last reset.
LUN Write IOPS
The total number of Target side SCSI write operations for this LUN since the statistics were last reset.
LUN Average Latency
The average latency for all operations in the system in milliseconds.
LUN Average Other Latency
The average latency for all other operations in the system in milliseconds.
LUN Average Read Latency
The average latency for all read operations in the system in milliseconds.
LUN Average Write Latency
The average latency for all write operations in the system in milliseconds.
LUN Summary
This table displays information about LUN performance on the NetApp Storage system.
Column Name
Description
LUN Error Count
The total number of errors seen on this LUN since the statistics were last reset. 
LUN Online
Whether the LUN is online. The possible values are [0 (Online), 1 (Offline)].
LUN Percent Used 
The percent utilization for the LUN.
LUN Read Bytes 
The total number of bytes read from this LUN since the statistics were last reset.
LUN Size
The total size of the LUN.
LUN Size Used
The size used in GB that is in use on the LUN.
LUN Write Bytes
The total number of bytes written to this LUN since the statisticswere last reset.
Qtree Summary
This table displays information about Qtree performance on the NetApp Storage system.
Column Name
Description
Qtree Status
The status of the qtree. The possible values are [0 (Normal) and 1 (Readonly)]
Used Disk Performance Summary
This table displays information about used disk performance on the NetApp Storage system.
Column Name
Description
Disk Utilization
The disk utilization percentage on the referenced disk drive.
vServer Summary
This table displays information about vServer performance on the NetApp Storage system.
Column Name
Description
vServer Status
The status of the vServer. The possible values are [0 (Running), 1 (Stopped), 2 (Starting), 3 (Stopping), 4 (Initializing), and 5(Deleting)].
Volume Summary
This table displays information about Virtual Volumes performance on the NetApp Storage system.
Column Name
Description
Volume Status
The status of the volume. The possible values are [0 (Online), 1 (Offline), 2 (Restricted) and 3 (mixed)].
Total Capacity
The total capacity of the volume.
Used Capacity
The used capacity of the volume.
Free Capacity
The total capacity that is free for use on the volume.
Percent Capacity Used
The total used capacity in percentage on the volume.
Total Snapshot Capacity
The total capacity for the snapshot in the volume.
Snapshot Used Capacity
The used capacity for the snapshot in the volume.
Snapshot Free Capacity
The free capacity available in the volume and the snapshot reserve.
Percent Snapshot Used
The used capacity in percentage for the snapshot in the volume.