How To Videos

Contents
uims
Contents
2
For more videos, see the
How To Videos
article on the CA UIM Probes Documentation Space.
Configure HTTPS
In this video, we will provide you with an overview of the various ways you can enable SSL encryption for users in CA UIM.
 

Configure Load Balancing for UMP
In this video, we will show you how to configure load balancing in a dual UMP environment.

Configure nas
The following videos will show you some of the ways in which you can configure the nas probe.
Create an Email Auto-Operator
In this video, we will show you how to configure a basic email Auto-Operator.

Managing Sustained Alarms
In this video, we will show you how to configure an Auto-Operator to manage sustained alarms.

When to Deploy Multiple nas Probes
In this video, we will show some example scenarios for deploying more than one nas probe in your CA UIM environment.

Configure Alarm Forwarding and Replication
In this video, we will show you how to forward alarms from a remote nas to a primary nas.

Create a Tunnel Server and Tunnel Client with Admin Console for CA UIM
This is a series of two videos. Use these videos to learn how to create a tunnel server and tunnel client in Admin Console.
Create a Tunnel Server and Tunnel Client with Admin Console - Part 1
In this video, you will learn how to create a tunnel server using Admin Console.

Create a Tunnel Server and Tunnel Client with Admin Console - Part 2
In this video, you will learn how to create the other side of the tunnel, which is known as the tunnel client, using Admin Console.

Create a Queue with Admin Console
This video will show you how to create a queue between two hubs using Admin Console.

Create Dashboards with the Dashboard Portlet
In this series of videos, we will show you how to create dashboards.
Create a Dashboard and Customize a Canvas
In this video, we will show you how to create a dashboard and customize the canvas.

Create Dashboard Widgets
In this video, we will show you how to create widgets to organize your dashboard.

Assign Data Sources to Widgets
In this video, we will show you how to assign data sources to the widgets that display your system metrics.

Set Widget Properties
In this video, we will show you how to set properties for widgets so that the dashboard display is easy to read and meaningful.

Publish the Dashboard
In this video, we will show you how to save and publish the dashboard so that it can be viewed by an account user.

Default Monitor Templates
In this video, we will show you how to use the probe Template Editor to apply a default monitor template. You can use default templates to configure the monitors and alarms for probe
Unified Dashboards
in CA UIM.

Diagnose Hub to Hub Windows Connection Issues
In this video, we will show you how to diagnose some common Windows firewall issues that can prevent communication between a CA UIM primary and a secondary hub.

Get Started with CABI Dashboards for CA UIM
In this series of videos, we will show you how to use the CABI dashboards for UIM and the CABI Server application.
Introduction to CABI for UIM
This video will show you how to install and access the pre-defined CABI for UIM dashboards and the CABI Server application.

Install CABI Server on a Robot
In this video, I will show you an overview of the tasks you must complete to install CABI Server for the first time. You must successfully install CABI Server to use the CA Business Intelligence dashboards. The examples shown in this video are based on CA Unified Infrastructure Management version 8.5.1 and cabi probe version 2.0. For step by step instructions, see Install CA Business Intelligence with CA UIM.
 

Create CABI for UIM Dashboards
This video will show you how to create a custom CABI for UIM dashboard in the CABI Server application and then add the dashboard to UMP on a CA UIM system.

Manage Configuration Profiles with Monitoring Configuration Services
Watch the Device Monitoring with MCS video to get started with Monitoring Configuration Service and create a configuration profile for a single device. After testing the configuration applied to a probe and reviewing the alarms and metrics the probe generates, watch the Group Monitoring with MCS video to learn how to copy a tested device configuration profile to a USM group. When you upgrade to CA UIM 8.5.1, watch the Update MCS Templates video to learn how to update templates with configuration profiles to newer versions.
Device Monitoring with MCS
In this video, we will show you how to use
Monitoring Configuration Service
(MCS) in CA UIM to create monitoring configuration profiles. MCS applies these profiles to target devices and deploys probes as needed.

Group Monitoring with MCS
In this video, we will show you how to use 
Monitoring Configuration Service
 (MCS) in CA UIM to copy a tested monitoring configuration profile to a group of devices. MCS applies the copied profile to all the devices in the group, and deploys probes as needed.

Update MCS Templates
In this video, we will show you how to update templates with configuration profiles to newer versions after you upgrade to CA UIM 8.5.1.

Monitor Template Filters
In this video, we will show you how to use the probe Template Editor to configure monitor template filters. We will create a template and demonstrate how to use filters to apply an alarm and a Quality of Service data point to a specific group of components.

Multi-UMP Configuration
In this video, we will show you how to use how to configure multiple UMP servers in a CA UIM environment.

Probe Deployment with Admin Console
In this video, we will show you how to deploy a probe using the Admin Console interface. This scenario shows the steps for downloading and then installing a probe package on a robot.

License Management in Admin Console
In this video, we will show you how to manage your CA UIM licenses using the Admin Console. The process that is shown in this video was introduced with CA UIM version 8.4.7.
 

Upgrade CABI Server on a Robot
In this video, we will show you an overview of the tasks you must complete to upgrade your CA Business Intelligence dashboards. The examples that are shown in this video are based on CA Unified Infrastructure Management version 8.5.1 and cabi probe version 2.0.
 

Upgrading CA UIM Server
In this series of videos, we will give you an overview of the CA UIM Upgrade process.
CA UIM Upgrade Process Introduction
This video will take a quick look at the four key steps that are involved in the CA UIM upgrade process.

CA UIM Upgrade Process - Step 1
This video highlights the various aspects that are involved during the assessment process. It also looks at the importance of creating the Health Check Remediation Plan.

CA UIM Upgrade Process - Step 2
This video describes the upgrade preparation process.

CA UIM Upgrade Process - Step 3
The third step in the upgrade process of CA UIM is to perform each component upgrade per the staging plan. We also look at the deployment process and best practices that should be followed during the upgrade.

CA UIM Upgrade Process - Step 4
The fourth and the last step in the upgrade process of CA UIM is to verify that things are working correctly with no loss of functionality, and verify that new functionality is working as expected.

Install CA UIM
The following videos demonstrate how to install CA UIM.
Install CA UIM Server 8.5.1
This video demonstrates how to install CA UIM Server 8.5.1, and should be the FIRST step in the installation process

CA UIM Manual Windows Robot Install 8.5.1
This video demonstrates how to manually install the Windows Robot, and should be the SECOND step in the installation process.

Install CA UIM UMP 8.5.1
This video describes how to install CA UIM UMP 8.5.1, and should be the THIRD step in the installation process.

Install CA UIM UR 8.5.1
This video demonstrates how to install CA UIM UR 8.5.1, and should be installed as the FOURTH step in the installation process.

ADE Linux Robot Install 8.5.1
This video demonstrates how to install the Linux robot using ADE for CA UIM 8.5.1.

Manual Linux Robot Install 8.5.1
This video demonstrates how to manually install the Linux robot for CA UIM 8.5.1.