Install the product.
Ensure that someone with the appropriate level of familiarity with your network deploys and configures
DX NetOps Virtual Network Assurance
In this article:
DX NetOps Virtual Network Assurance
DX NetOps Virtual Network Assurance
(VNA) is compatible with the following product versions:
Verify the Requirements of Your Technologies
Verify the requirements of each technology in your virtual network environment:
We recommend, but do not require, a single VNA per data center or technology grouping in your virtual network environment. For example, you can have OpenStack, Open vSwitch, and Cisco ACI on the same instance of VNA.
You can have multiple plug-ins of the same technology type on a single instance of VNA.
Ensure that you install the product as the root user.
Prepare to Install
DX NetOps Virtual Network Assurance
Before you install VNA, verify that your system meets the requirements.
Follow these steps:
  1. Verify that the VNA host meets the system requirements:
    • Memory:
      12 GB
    • CPU:
    • Disk:
      20 GB
    • Operating System:
      RHEL/CentOS 6.5 through 7.x
    • Packages:
  2. Install Oracle or any OpenJDK 64-bit Java 8 as the default JDK.
    DX NetOps Virtual Network Assurance
    does not run on IBM SDK Java and any JRE. Only JDKs are supported.
    Use the
    tools to select the default JDK version of Java to use.
    For more information, see the Red Hat documentation.
    Alternatively, create a link in
    to the Java 8 JDK Java executable.
  3. Verify that the system hostname resolves to an IP address in
  4. Verify that the following ports are open on the VNA host:
    • Verify the ports that are required for communication to the orchestrators and controllers.
    • Port 8080 is required for communication between VNA and other data sources.
    • Port 9990 is the WildFly management port.
  5. WildFly is installed as part of VNA. Verify that no other application that uses WildFly and that no other versions of WildFly are installed on the host system.
DX NetOps Virtual Network Assurance
Follow these steps:
  1. Copy the installation files to the host server.
  2. Open a command line and issue the following command:
    To avoid prompts and use the default values, add the following parameter to the install command:
    This script creates the WildFly user and the MySQL user.
  3. Accept the EULA.
  4. Follow the instructions in the console.
    The prompts have the following default values:
    • Installation directory:
      You can install VNA on a custom directory.
    • Default user domain = Default Domain
      For more information about user domains, see Manage Domain Groups.
    • WildFly admin password = admin
    • WildFly JMS password = app
    • Configure APM = N
    • MySQL server port = 3306
    • MySQL root user password =  admin
  5. (Optional) To configure a
    DX Application Performance Management
    agent during installation, provide the
    DX Application Performance Management
    host and port.
    To configure the agent after installation, see Monitor CA Virtual Network Assurance Broker Performance.
    The script installs VNA.
Next Steps
After successful installation, complete the following.
Install Logs
installation log is located in the
directory. If the installation fails or if you stop the installation abruptly, the logs are saved to the directory where you have the VNA installer.
Configure the Limit on the Number of Open Files
Verify that the
user has a limit of at least 65536 on the number of open files. Set this value permanently.
Follow these steps:
  1. Log in as the
    user on the VNA host.
  2. Change the
    for the open files limit to at least 65536:
    ulimit -n
    ulimit -n 65536
  3. Open the following file:
  4. Add the following lines:
    # Added by VNA
    * soft nofile 65536
    # Added by VNA
    * hard nofile 65536
    Restart VNA for these changes to take effect. If you are upgrading, the upgrade process automatically restarts VNA.
  5. Verify that the number of open files is set properly:
    ulimit -n
    The command returns the limit that you specified earlier.
Configure the Plug-ins
VNA collects performance data for virtual networks. To enable data collection, configure the plug-in for each technology in your environment.
For more information, see Building.