TMSEXPDT Messages

*** LABEL= OR ABEND= RETENTION MISSING
ca1tms
*** LABEL= OR ABEND= RETENTION MISSING
Reason:
The retention specification was not found for the RDS rule.
Action:
Correct the control statement(s) and resubmit the job.
*** UNKNOWN RECORD, EXPECTED DSN= OR MGMTCLAS= KEYWORD
Reason:
The DSN or MGMTCLAS keyword must be the first keyword specified.
Action:
Correct the control statement(s) and resubmit the job.
** WARNING Audit data set full
Reason:
The AUDIT data set is beyond the defined threshold.
Action:
Run TMSCOPY to back the TMC and AUDIT data sets up and resubmit the job.
** WARNING VOLSER=xxxxxx DSN=xxxxxxxx Dsname has changed during run, skipping** WARNING DSNB=xxxxxxx DSN=xxxxxxxx Dsname has changed during run, skipping
Reason:
While TMSEXPDT was processing, the data set name changed for the volume or DSNB.
Action:
None. This is an informational message.
** WARNING VOLSER=xxxxxx DSN=xxxxxxxx System date used for creation date** WARNING DSNB=xxxxxxx DSN=xxxxxxxx System date used for creation date
Reason:
The creation date for the VOLSER or DSNB and data set listed was invalid. The current system date was used instead.
Action:
None. This is an informational message.
** WARNING VOLSER=xxxxxx DSN=xxxxxxxx Tape was scratched during run, skipping
Reason:
During the time that TMSEXPDT selected the record and the time that an attempt was made to update the record, the volume went scratch.
Action:
None. This is an informational message.
** WARNING VOLSER=xxxxxx DSN=xxxxxxxx Update failed
Reason:
An error occurred while updating the TMC for the volume and data set, and was listed.
Action:
Review Report 82 and job log for other messages related to the failure.
** WARNING 1STVOL=xxxxxx DSN=xxxxxxxx Contains invalid NEXTVOL pointer
Reason:
An invalid VOLSER pointer was found for the VOLSER and data set name listed.
Action:
Run TMSPTRS to correct data set pointers.
*** xxxxxxxx PATTERN MASKING ERROR: yyyyyyyy
Reason:
The keyword listed contains an invalid pattern masking specification. The error message from CTSPM is listed.
Action:
Correct the control statement(s) and resubmit the job.
*** xxxxxxxx SPECIFIED MORE THAN ONCE
Reason:
The keyword listed has already been specified for the RDS rule.
Action:
Correct the control statement(s) and resubmit the job.
CA 1
NOT ACTIVE
Reason:
CA 1
was not in an active or batch active state.
Action:
Make
CA 1
active or batch active and resubmit the job.
CTSDATE OPEN FAILED
Reason:
Open processing for CTSDATE failed.
Action:
Review Report 82 and job log for other messages related to the failure.
CTSPM OPEN FAILED
Reason:
Open processing for CTSPM failed.
Action:
Review Report 82 and job log for other messages related to the failure.
EARLOUT DD IS MISSING
Reason:
The EARLOUT ddname was not found.
Action:
Correct the JCL and resubmit the job.
FS xxxx DATE
Reason:
Lists the file sequence of the file that has the highest expiration date.
Action:
None. This is an informational message. The highest expiration date of a volume set that contains multifiles is moved to the TMC Volume record expiration date to control the entire volume set.
FIRST RECORD OF TMC IS NOT TMSCTL#1
Reason:
The TMC dynamically allocated did not contain the first Control Record.
Action:
See the chapter on troubleshooting in the
Programming
.
MGMTCLAS=KEYWORD CANNOT BE SPECIFIED WITH JOBNAME
Reason:
The JOBNAME= keyword was specified with the MGMTCLAS keyword on the same RDS rule.
Action:
Correct the control statement(s) and resubmit the job.
NO RDS REC
Reason:
No matching RDS rule was found for the data set.
Action:
Ensure the RDS has the correct input statements. Otherwise, no action is required.
TMC SEQUENTIAL INTERFACE FAILED
Reason:
TMSSIO could not open the TMC for processing.
Action:
Review Report 82 and job log for other messages related to the failure.
TMSEXPDT ENDED WITH ERROR: FDBK=x message.text
Reason:
An error occurred during processing.
Action:
To correct the error and resubmit the job, review the message text.
TMSRPT DD IS MISSING
Reason:
The TMSRPT ddname was not found.
Action:
Correct the JCL and resubmit the job.
*** DUPLICATE RETENTION FOUND
Reason:
This retention statement is a duplicate of a previous statement.
Action:
Correct the retention statement(s) and resubmit the job.
*** BAD VALUE FOR ABEND=EXPDT=
Reason:
An invalid value was specified for this keyword.
Action:
Correct the retention statement(s) and resubmit the job.
*** BAD VALUE FOR ABEND=RETPD= OR ABEND=WRETPD=
Reason:
An invalid value was specified for this keyword.
Action:
Correct the retention statement(s) and resubmit the job.
*** PATTERN MASKING ERROR:
Reason:
DSN= or JOB= does not contain a valid pattern mask.
Action:
Correct the retention statement(s) and resubmit the job.
*** BAD VALUE FOR LABEL=EXPDT=
Reason:
An invalid value was specified for this keyword.
Action:
Correct the retention statement(s) and resubmit the job.
*** BAD VALUE FOR LABEL=RETPD= OR LABEL=WRETPD=
Reason:
An invalid value was specified for this keyword.
Action:
Correct the retention statement(s) and resubmit the job.
*** ABEND DATE IS EXPIRED
Reason:
An expiration date value specified is in the past.
Action:
Correct the retention statement(s) and resubmit the job.
*** LABEL DATE IS EXPIRED
Reason:
An expiration date value specified is in the past.
Action:
Correct the retention statement(s) and resubmit the job.
*** TESTRDS NOT VALID WITH DSNBS, TEST AND NODEFLT
Reason:
TESTRDS parameter is not valid with these parms.
Action:
Correct the JCL and resubmit the job.
*** SELECT AND JOB ARE MUTUALLY EXCLUSIVE
Reason:
The SELECT and JOB keywords can not be specified in the same retention statement.
Action:
Correct the retention statement(s) and resubmit the job.
*** PARSE ERROR
Reason:
This statement has invalid syntax or missing/extra keywords.
Action:
Correct the retention statement(s) and resubmit the job.
*** PARSE ERROR IN ABEND KEYWORD
Reason:
This statement has invalid syntax or missing/extra keywords.
Action:
Correct the retention statement(s) and resubmit the job.
*** PARSE ERROR IN LABEL KEYWORD
Reason:
This statement has invalid syntax or missing/extra keywords.
Action:
Correct the retention statement(s) and resubmit the job.
*** MGMTCLAS=, M= DSN=, AND D= ARE MUTUALLY EXCLUSIVE
Reason:
This statement contains keywords or forms of keywords which cannot be specified together on an RDS statement.
Action:
Correct the retention statement(s) and resubmit the job.
*** JOBNAME=, JOB= and J= ARE MUTUALLY EXCLUSIVE
Reason:
This statement contains multiple forms of the same keyword.
Action:
Correct the retention statement(s) and resubmit the job.
*** PROGRAM ABORTED FOR FATAL PARSE ERROR
Reason:
The program encountered error(s) while parsing a RDS statement that were so severe that the program could not identify the error or continue processing.
Action:
Correct the retention statement(s) and resubmit the job.
*** WHILECAT CANNOT BE USED WITH CATALOG OR PERMANENT
Reason:
WHILECAT cannot be used with LABEL=EXPDT=CATALOG or LABEL=EXPDT=PERMANENT.
Action:
Correct the control statement(s) and resubmit the job.
*** WHILECAT MUST BE YES OR Y
Reason:
WHILECAT was set to NO when LABEL=RETPD=JCL was specified.
Action:
Correct the control statement(s) and resubmit the job.
*** RETPD=JCL CANNOT BE SPECIFIED WITH SELECT=ALL
Reason:
LABEL=RETPD=JCL was specified with SELECT=ALL.
Action:
Correct the control statement(s) and resubmit the job.
*** WHILECAT IS NOT ALLOWED IF OCTLG=YES IN TMOOPTXX
Reason:
WHILECAT=YES was specified on a control statement while the OCTLG option was set to YES.
Action:
Remove the WHILECAT=YES statement from the control statement and resubmit the job, or turn off the OCTLG option so that it is set to NO.