Customize NetMaster NM for SNA
NetMaster NM for SNA
Customize
NetMaster NM for SNA
Required roles: systems programmer |
|---|
nwmscl122
After you have completed the common customization tasks for
NetMaster NM for SNA
, perform the following unique customization tasks for the product. After you complete customization, you can use product system variables and z/OS static system symbols to help you plan the future deployment to multiple regions. You generate an initialization (INI) file where you can use these variables and symbols. For information about setting up the INI file, see Administrating.
Update and Review the Unique Fast Customization Parameters for
NetMaster NM for SNA
When you performed the common customization tasks for
NetMaster NM for SNA
, you updated and reviewed the common fast customization parameters for all CA NetMaster products. Next, update and review the unique fast customization parameters for NetMaster NM for SNA
, as follows:Implement the PPO Message Interface
Use this procedure to implement the Primary Program Operator (PPO) message interface.
Follow these steps:
- EnterUbeside the PPO Message Interface Details parameter group. The PPO - PPO Message Interface Details panel appears.
- Verify the PPO ACB Name.
- Press F6 (Action) to set the specified values and start the interface.
- Press F3 (File) to save your settings.The Customizer : Fast Setup panel appears with the Reviewed column marked Yes for the PPO Message Interface Details.
Implement the CNM Interface
To implement the CNM interface, you need to define the following:
- CNM ACB details
- CNM procedure and status
- CNM user exit and status
Before performing this procedure, ensure that you have set up the CNM Routing Table.
Follow these steps:
- EnterUbeside the CNM Interface Details parameter group. The CNM - CNM Interface Details panel appears.
- Verify the CNM ACB Name.
- Complete the remaining fields on the panel. For information on these fields, press F1 (Help).
- Press F8 (Forward). The second panel for this parameter group appears.
- Complete the CNM User Exit Details. For information on these fields, press F1 (Help).This page allows you to specify a CNM user exit. If you are installingNetMaster NM for SNAfor the first time, you must leave this blank and consider implementing a user exit later. See Administrating for more information about the CNM user exit.
- Press F6 (Action) to set the specified values and start the interface.
- Press F3 (File) to save your settings.The Customizer : Fast Setup panel appears with the Reviewed column marked Yes for the CNM interface details.
Implement SAW
To implement session awareness (SAW), you must define the following:
- SAW ACB details
- SAW start options and status
- SAW user exit and status
Before performing this procedure, ensure that you have set up the CNM Routing Table.
Follow these steps:
- EnterUbeside the Session Awareness (SAW) Details parameter group. The SAW - Session Awareness (SAW) Details panel appears.
- Verify the SAW ACB Name.
- Complete the remaining fields on the panel. For information on these fields, press F1 (Help).
- Press F8.The second panel for this parameter group appears.
- Complete the NTS User Exit Details. For information on these fields, press F1 (Help).This page allows you to specify an NTS user exit. If you are installingNetMaster NM for SNAfor the first time, leave this blank and consider implementing a user exit later. See Administrating for more information about the NTS user exit.
- Press F6 (Action) to set the specified values and start session awareness.
- Press F3 (File) to save your settings.The Customizer : Fast Setup panel appears with the Reviewed column marked Yes for the Session Awareness (SAW) Details.
Update and Review Additional Parameter Groups for
NetMaster NM for SNA
To begin the process of updating and reviewing other customization parameters, open the System Parameters panel, and select Custom Setup or Complete Setup. Update and review the following parameter groups:
Implement the TCP/IP Sockets Interface Parameters
This procedure enables TCP/IP support. Access to sockets interfaces requires UNIX System Services authorization, which is descrbed in Prepare IBM Communications Server (TCP/IP and FTM Only).
Follow these steps:
- EnterUnext to the TCP/IP Sockets Interface parameter group.
- Tab to thePFS Nameinput field, and enter the required value. This is the name of the z/OS Communications Server TCP/IP job.
- TheInbound Connections Portfield contains a default port number. If another region on this system is already using that number, update the field.The port number must be unique on a system.
- (Optional) Specify theRetry Interval.
- Specify theObeyfile DSNfor the Work Dataset.
- Press F6 (Action) to set the specified values and start the interface.
- Press F3 (File) to save your settings.The display returns to the Parameter Groups listing and displays theParameter group $NM SOCKETS updatedmessage.
For more information on entering fields, press F1 (Help).
Perform Additional Customization
You have now completed the initial customization tasks for your product.
Administrating describes other ways that you can customize your product.