HSM Configuration Messages
PAM-CMN-1256 = HSM capabilities in use, but not permitted by license.
capamnew
PAM-CMN-1256 = HSM capabilities in use, but not permitted by license.
PAM-CMN-1259 = SafeNet HSM must be removed before Entrust HSM may be licensed.
PAM-CMN-1260 = Entrust HSM must be removed before SafeNet HSM may be licensed.
PAM-CMN-1261 = Only one type of HSM (SafeNet, Entrust) may be specified in a license.
PAM-CMN-1280 = CA PAM is not provisioned to use an HSM
PAM-CMN-1281 = Error trying to provision CA PAM for SafeNet HSM.
PAM-CMN-1282 = SafeNet HSM with address {0} added.
PAM-CMN-1283 = Attempt to remove the SafeNet HSM configuration failed due to the passwords currently being re-encrypted
PAM-CMN-1284 = HSM with address {0} removed.
PAM-CMN-1285 = Attempt to initialize LUNA PCI has failed
PAM-CMN-1286 = LUNA PCI has been initialized successfully
PAM-CMN-1287 = Attempt to activate LUNA PCI has failed
PAM-CMN-1288 = LUNA PCI has been activated
PAM-CMN-1289 = Attempt to extract LUNA PCI Key has failed
PAM-CMN-1290 = LUNA PCI Key extracted
PAM-CMN-1291 = Failed to securely insert the cipher key
PAM-CMN-1292 = Success inserting the encrypted cipher key into the LunaPCI-E device
PAM-CMN-1293 = Failed to initialize the internal LunaPCI-E device
PAM-CMN-1294 = Failed to create a partition on the internal LunaPCI-E device
PAM-CMN-1295 = Success initializing the internal LunaPCI-E device
PAM-CMN-1296 = Failed to securely extract the cipher key
PAM-CMN-1297 = Failed to PED activate the LunaPCI-E partition
PAM-CMN-1298 = Failed to secure the partition password for the LunaPCI-E partition
PAM-CMN-1299 = Failed to log into the partition with the supplied password
PAM-CMN-1300 = Failed to generate the cypher key during the initial activation
PAM-CMN-1301 = Success activating the LunaPCI-E device on this non primary clustered CA PAM
PAM-CMN-1302 = Success activating the LunaPCI-E device on this primary clustered CA PAM
PAM-CMN-1303 = Success activating the LunaPCI-E device on this standalone CA PAM...reboot is needed
PAM-CMN-1304 = Error HSM script arguments are incomplete
PAM-CMN-1305 = Error CA PAM is not configured to use an HSM
PAM-CMN-1306 = Error the HSM password is incorrect
PAM-CMN-1307 = Success updating the HSM password
PAM-CMN-2547 = Cannot add a networked HSM because this PAM has an internal LunaPCI-E device
PAM-CMN-2548 = Proper usage: addHSM <input_1> <input_2> <input_3> <input_4> <input_5> <input_6>
PAM-CMN-2549 = The HSM software is not installed on PAM
PAM-CMN-2806 = Proper usage: appendHSM <principalName> <HSM_IP> <principalPassword> <storagePassword> <storageName>
PAM-CMN-2808 = The partition {0} on the first HSM does not match with {1} on this HSM
PAM-CMN-2809 = PAM is not provisioned to use an HSM. Please install the first HSM.
PAM-CMN-2810 = The HSM group is already at the maximum of 3
PAM-CMN-2811 = Cannot determine the primary HSM group member.
PAM-CMN-2812 = The HSM {0} is already provisioned on this PAM
PAM-CMN-2813 = Cannot determine the HSM group members.
PAM-CMN-2815 = Unable to copy the HSM certificate
PAM-CMN-2817 = This client {0} is already registered on the HSM
PAM-CMN-2820 = Failed to add HSM {0}. Consistency check failed
PAM-CMN-2821 = Failed to add HSM {0}. Post synch consistency check failed
PAM-CMN-2822 = Success, you must reboot the appliance for this change to take effect!
PAM-CMN-2823 = Proper usage: appendThalesHSM <tokenName> <RFS_IP> <HSM_IP> <tokenPassword>
PAM-CMN-2824 = Cannot deploy an OCS with individual names. All cards in the OCS must be named the same and must have the same passwords.
PAM-CMN-2825 = Bad HSM IP address
PAM-CMN-2826 = Bad RFS IP address
PAM-CMN-2827 = Failed to get the ESN and hash from {0}
PAM-CMN-2828 = Failed to enroll the client to the HSM {0}
PAM-CMN-2829 = Proper usage: createHSM <principalName> <HSM_IP> <principalPassword> <storagePassword> <storageName>
PAM-CMN-2830 = PAM is already provisioned to use an HSM
PAM-CMN-2833 = Invalid Security Principal, Password or HSM IP address. Please try again.
PAM-CMN-2835 = Unable to create a Luna client certificate
PAM-CMN-2836 = HSM connection test from {0} failed.
PAM-CMN-2839 = PAM is not provisioned to use an HSM
PAM-CMN-2840 = Failed to remove HSM {0}
PAM-CMN-2841 = {0} is not a deployed HSM.
PAM-CMN-2842 = Unknown HSM vendor
PAM-CMN-2843 = Cannot mix HSMs from different vendors
PAM-CMN-2844 = Proper usage: removeHSM <HSM_IP>
PAM-CMN-2845 = The HSM {0} is not provisioned on this PAM
PAM-CMN-2846 = LunaPCI-E Uninitialized
PAM-CMN-2847 = LunaPCI-E Initialized
PAM-CMN-2850="PAM is currently provisioned to use an HSM"
PAM-CMN-2866 = Proper usage: createThalesHSM <tokenName> <RFS_IP> <HSM_IP> <tokenPassword>
PAM-CMN-2867 = Failed to get the ESN and hash from {0} on port {1}
PAM-CMN-2868 = Failed to setup with the RFS {0} on port {1}
PAM-CMN-2869 = Failed to synch update with the RFS {0} on port {1}
PAM-CMN-2870 = Failed to test login cache with the HSM token {0}
PAM-CMN-2871 = Failed to test login with the HSM token {0}
PAM-CMN-2872 = Failed to generate the AES256 cipher key on the HSM token {0}
PAM-CMN-2873 = This standalone PAM does not have commit permission to the RFS. You must run 'rfs-setup --gang-client' on the RFS first.
PAM-CMN-2875 = Failed to get the ESN and hash from {0}
PAM-CMN-3234="The HSM is not functioning properly with PKCS11 result: {0}, {1}"