Installing the
SolutionPack

Install this SolutionPack on all core software hosts in your environment.
  • Core modules must be up-to-date in all servers because not all module dependencies are validated during the
    SolutionPack
    installation or update process.
  • Following files under
    /tmp
    are important for functioning of the M&R health data collection. Hence, you must exclude them from housekeeping task (if any), that is enabled to remove the temporary files:
    • /tmp/.java_pid*
    • /tmp/hsperfdata_apg/*
  1. Click
    Administration
    .
  2. Click
    Centralized Management
    .
  3. Click
    SolutionPack Center
    .
  4. Select the SolutionPack in the
    Browse and Install SolutionPacks
    window.
  5. Click
    Install
    .
  6. Type the instance name.
  7. Assign a server for each component.
    In a typical four server deployment, the recommended servers are selected automatically.
  8. Click
    Next
    .
    The window displays pre-configured alert details.
  9. Click
    Next
    .
    The window displays data collection details.
  10. From the
    Data collection
    drop-down menu, select existing settings that have been specified for other components, or select
    Add a new data collection
    .
    If you select
    Add a new data collection
    , type information about the data collection. In
    Hostname or IP address to send data to
    , use
    localhost
    on port 2020, which is the Collector host where the Load Balancer Connector is installed.
  11. From the
    Alerting on data collection
    drop-down menu, select existing settings that have been specified for other components, or select
    Add a new alerting data collection
    .
    If you select
    Add a new alerting on data collection
    , type information about the alerting configuration. In
    Alerting Backend hostname or IP address
    , specify the Primary Backend host.
  12. Select
    Configure advanced settings
    to configure polling settings.
  13. Click
    Next
    .
    The window displays reports settings.
  14. Click
    Install.
  15. Click
    Ok
    once installation is complete.
    Performance data will displayed in about an hour.
    The following message might appear in the collection log during operation: WARNING -- [2014-04-25 05:26:38 EDT] -- f::a(): JVM IO ERROR 'No such process'. ID: '17032', NAME: 'lib/module-manager.jar exit'. You can ignore this message.