CLI commands invoked on Huawei devices
The CLI show commands for Huawei devices are listed and described in CLI commands for discovery on Huawei devices.
Command | Description | Comment |
|---|---|---|
CLI commands for general session operation | ||
system-view | Change to system view from current user view. | |
display users | View the login information of the users
on each user interface. | |
user-interface vty <number> | Enter single-user interface view or multi-user interface view. Enter the view of the VTY user interface by entering the view of the user interfaces VTY 0 through VTY 3. | |
screen-length 0 | Set the number of displayed lines. Setting the screen length to zero disables multiple-screen output. | |
CLI commands for MPLS discovery | ||
display mpls interface | View all MPLS-enabled interfaces. | |
display mpls lsp verbose | View LSP information. By default, the display mpls lsp command displays all LSP information. By adding verbose, you display
detailed information. | |
CLI commands for L2VPN discovery | ||
display mpls l2vc | Display information about Martini VCs configured on the
device. If you specify an interface, the command displays information about Martini VCs configured on the CE interface. | |
CLI commands for L3VPN discovery | ||
display ip vpn-instance verbose | View the VPN instance configuration on PEs. | |
display bgp vpnv4 all routing-table label | Display information about labeled routes in the BGP routing table. | |