MIBs accessed for remote ping

For on-demand remote pings, the
MPLS Topology Server
sends remote ping requests to supported devices to write remote ping entries to their Ping MIBs, and to read remote ping test results from their Ping MIBs.
For periodic remote pings, the
MPLS Monitoring Server
sends remote ping requests to supported devices to write remote ping entries to their Ping MIBs, and to read remote ping test results from their Ping MIBs. Periodic remote pings (objects) are created on the
MPLS Topology Server
, transferred to the
MPLS Monitoring Server
, and started on the
MPLS Monitoring Server
.
MIBs access for remote ping identifies the device and MIB support for remote ping.
MIBs access for remote ping
Device
MIB
Cisco devices
CISCO-PING-MIB
Juniper M/T, ERX, or ERX virtual routers
DISMAN-PING-MIB, JUNIPER-PING-MIB
MIB objects accessed for remote ping on Cisco devices lists the MIB objects that are accessed by
for remote ping on Cisco devices. For a periodic remote ping, the table also lists the associated attributes that are populated in the RemotePing object.
MIB objects accessed for remote ping on Cisco devices
MIB object
OID
Description
RemotePing attribute
CISCO-PING-MIB
ciscoPingProtocol
.1.3.6.1.4.1.9.9.16.1.1.1.2
Protocol to use for remote ping.
(Not applicable)
ciscoPingAddress
.1.3.6.1.4.1.9.9.16.1.1.1.3
Address of the device to be pinged.
Destination
ciscoPingPacketCount
.1.3.6.1.4.1.9.9.16.1.1.1.4
Number of ping packets to send to the target in this sequence.
PingPerInterval
ciscoPingPacketSize
.1.3.6.1.4.1.9.9.16.1.1.1.5
Size of ping packets to send to the target in this sequence.
PacketSize
ciscoPingDelay
.1.3.6.1.4.1.9.9.16.1.1.1.7
Minimum amount of time to wait before sending the next packet in a sequence after receiving a response or declaring a timeout for a previous packet.
PingInterval
ciscoPingSentPackets
.1.3.6.1.4.1.9.9.16.1.1.1.9
Number of ping packets that have been sent to the target in this sequence.
(Not applicable)
ciscoPingReceivedPackets
.1.3.6.1.4.1.9.9.16.1.1.1.10
Number of ping packets that have been received from the target in this sequence.
(Not applicable)
ciscoPingMinRtt
.1.3.6.1.4.1.9.9.16.1.1.1.11
Minimum round-trip-time of all the packets that have been sent in this sequence.
(Not applicable)
ciscoPingAvgRtt
.1.3.6.1.4.1.9.9.16.1.1.1.12
Average round-trip-time of all the packets that have been sent in this sequence.
(Not applicable)
ciscoPingMaxRtt
.1.3.6.1.4.1.9.9.16.1.1.1.13
Maximum round-trip-time of all the packets that have been sent in this sequence.
(Not applicable)
ciscoPingCompleted
.1.3.6.1.4.1.9.9.16.1.1.1.14
Set to true when all the packets in this sequence have been responded to or have timed out.
(Not applicable)
ciscoPingEntryOwner
.1.3.6.1.4.1.9.9.16.1.1.1.15
Entity that configured this entry.
(Not applicable)
ciscoPingEntryStatus
.1.3.6.1.4.1.9.9.16.1.1.1.16
Allows ciscoPingEntry entries to be created, activated, and deleted in the ciscoPingTable.
(Not applicable)
ciscoPingVrfName
.1.3.6.1.4.1.9.9.16.1.1.1.17
VPN name in which the ping will be used.
VrfName
MIB objects accessed for remote ping on Juniper devices lists the MIB objects that are accessed by
for remote ping on Juniper devices. For a periodic remote ping, the table also lists the associated attributes that are populated in the RemotePing object.
MIB objects accessed for remote ping on Juniper devices
MIB object
OID
Description
RemotePing attribute
DISMAN-PING-MIB
pingCtlTargetAddressType
.1.3.6.1.2.1.80.1.2.1.3
Type of host address to be used at a remote host for performing a ping operation.
(Not applicable)
pingCtlTargetAddress
.1.3.6.1.2.1.80.1.2.1.4
Host address to be used at a remote host for performing a ping operation.
Destination
pingCtlDataSize
.1.3.6.1.2.1.80.1.2.1.5
Size of the data portion to be transmitted in a ping operation in octets.
PacketSize
pingCtlProbeCount
.1.3.6.1.2.1.80.1.2.1.7
Number of times to perform a ping operation at a remote host.
PingPerInterval
pingCtlAdminStatus
.1.3.6.1.2.1.80.1.2.1.8
Desired state in which a pingCtlEntry should be.
(Not applicable)
pingCtlFrequency
.1.3.6.1.2.1.80.1.2.1.10
Number of seconds to wait before repeating a ping test.
PingInterval
pingCtlRowStatus
.1.3.6.1.2.1.80.1.2.1.23
Allows entries to be created and deleted in the pingCtlTable.
(Not applicable)
pingResultsOperStatus
.1.3.6.1.2.1.80.1.3.1.1
Operational state of a pingCtlEntry.
(Not applicable)
pingResultsMinRtt
.1.3.6.1.2.1.80.1.3.1.4
Minimum ping round-trip-time (RTT) received.
(Not applicable)
pingResultsMaxRtt
.1.3.6.1.2.1.80.1.3.1.5
Maximum ping round-trip-time (RTT) received.
(Not applicable)
pingResultsAverageRtt
.1.3.6.1.2.1.80.1.3.1.6
Current average ping round-trip-time (RTT).
(Not applicable)
pingResultsProbeResponses
.1.3.6.1.2.1.80.1.3.1.7
Number of responses received for the corresponding pingCtlEntry and pingResultsEntry.
(Not applicable)
pingResultsSentProbes
.1.3.6.1.2.1.80.1.3.1.8
Number of probes sent for the corresponding pingCtlEntry and pingResultsEntry.
(Not applicable)
JUNIPER-PING-MIB
jnxPingCtlRoutingInstance-Name
.1.3.6.1.4.1.2636.3.7.1.2.1.6
Name of the routing instance that is used when directing outgoing ping packets.
VrfName
Procedures for enabling the remote ping server tool and creating periodic remote pings are given in the
. Directions for invoking on-demand remote pings are given in the
.