CLI commands
for EIGRP discovery
Because the enterprise
EIGRP MIB is typically
not used by Cisco devices, uses CLI discovery and CLI
polling to discover and monitor EIGRP topology. The CLI commands that
are invoked for EIGRP discovery are identified in this section, and
the CLI commands that are invoked for EIGRP polling are identified
in the .
EIGRP discovery is not supported in IPv6 network.
establishes Telnet, SSH1, or SSH2 sessions to the Cisco
devices and invokes specific CLI "show" commands to discover the following
routing topology objects and their relationships:
- EIGRP domains
- EIGRP services
- EIGRP networks
- EIGRP protocol endpoints
- EIGRP sessionsThe CLI show commands that are invoked for EIGRP discovery are listed in EIGRP discovery CLI commands.
Command | Description |
|---|---|
| Prevents the Cisco device from pausing
between multiple screens of output. During
the session, the Cisco device uses the terminal length value to determine
when to pause during multiple-screen output. A value of 0 prevents
the device from pausing between screens of output. |
| Displays the IP address of the EIGRP neighbor
(remote) and the local interface through which the neighbor can be
reached. |
| Displays the IP routing-protocol process
parameters and statistics. |