SNMP and CLI discovery support

uses Simple Network Management Protocol (SNMP) and command line interface (CLI) to perform discovery on the supported devices in the managed IP network.
supports IPv4 and IPv6 discovery through SNMP (v1, v2c, v3) and CLI using Telnet and SSH.
Discovery and Monitoring of IPv6 network topology is not supported in EIGRP Manager, which is part of
.
Discovery and monitoring mechanism in IPv4 and IPv6 network lists the discovery and monitoring mechanism for both IPv4 and IPv6, along with the supported vendors.
Discovery and monitoring mechanism in IPv4 and IPv6 network
Platform
IPv4 Discovery and monitoring mechanism
IPv6 Discovery and monitoring mechanism
IS-IS
BGP
OSPF
EIGRP
IS-IS
BGP
OSPF
EIGRP
Linux
  • SNMP V2C, V3 (Juniper)
  • CLI (Telnet or SSH) - Perl (Cisco)
    Access over IPv4 only.
SNMP V2C, V3
(Cisco, Juniper)
SNMP V2C, V3
(Cisco, Juniper)
CLI (Telnet or SSH) - Perl
(Cisco)
Access over IPv4 only.
SNMPV2C, V3
(Cisco, Juniper)
CLI (Telnet or SSH) - Perl
(Cisco, Juniper)
Access over IPv4 and IPv6.
SNMPV2C, V3
(Cisco)
Not supported
Discovery sources for Cisco devices and Discovery sources for Juniper devices show the discovery sources for the supported devices.
Discovery sources for Cisco devices
BGP objects
EIGRP objects
IS-IS objects
OSPF objects
BGP4 MIB (RFC 1657)
uses SNMP discovery to discover Cisco BGP objects.
CLI
uses CLI discovery to discover Cisco EIGRP objects.
CLI
uses CLI discovery to discover Cisco IS-IS objects.
OSPF MIB (RFC 1253)
uses SNMP discovery to discover Cisco OSPF objects.
Discovery sources for Juniper devices
BGP objects
EIGRP objects
IS-IS objects
OSPF objects
BGP4 MIB (RFC 1657)
uses SNMP discovery to discover Juniper BGP objects.
Not applicable. EIGRP is used only by Cisco devices.
IS-IS MIB (RFC 1195)
uses SNMP discovery to discover Juniper IS-IS objects.
OSPF MIB (RFC 1253)
uses SNMP discovery to discover Juniper OSPF objects.